RICOH PRO C5100

[slimslob]

Great banter back and forth lol

In case anyone finds this thread looking for an answer, the birth certificate on the Pro C5100 is typically in the large capacity tray. When you open the drawer, there is a label showing how to load paper on the left. Look under that and you should find the factory settings.

I believe that you mean the tandem tray. The Large Capacity Tray or more precisely LCIT, Large Capacity Input Tray, is an up stream peripheral device such as the LCIT RT4020 or LCIT RT4030.

[Bricorley]

You can fix this ease if you have an identical machine. Donwload the NVRAM data from the good unit. Change the name of the data to match your units serial serial number. Upload to bad unit. Format HDD. Problem solved

[slimslob]

You can fix this ease if you have an identical machine. Donwload the NVRAM data from the good unit. Change the name of the data to match your units serial serial number. Upload to bad unit. Format HDD. Problem solved

This seldom works for restoring after doing a clear all memory SP 5801-001 or Clear Engine Memory Sp5801-002. The final laser alignment data for each machine can be unique and that from one machine can be far enough off that Auto Color alignment may nit be able to pull it back into calibration. That is the purpose for the birth certificate.

[mga]

This seldom works for restoring after doing a clear all memory SP 5801-001 or Clear Engine Memory Sp5801-002. The final laser alignment data for each machine can be unique and that from one machine can be far enough off that Auto Color alignment may nit be able to pull it back into calibration. That is the purpose for the birth certificate.

Correct. Also all machine nvram details are not completely the same ie laser, registration etc. But it's a good please to start if you don't have machine 1 sp print out or nvram backup.