I would start with checking all the SP settings for color, cleaning the ID sensors, replacing the cleaning unit and do an automatic color calibration (perhaps this first).
I would start with checking all the SP settings for color, cleaning the ID sensors, replacing the cleaning unit and do an automatic color calibration (perhaps this first).
Hi there!
There were some important FW-updates for the 20th METIS-series. First at all: clean the optics & ITB-sensors, update to the newest FW & then do ACC.
No sp-input when changing the PCDU, but if you change dev-unit & pcu you must input the sp-code .
Greetings...
Bookmarks