Ricoh pro c5100 error code sc538-01

[Chimatoner]

Ricoh pro c 5100 showing error code sc 538-01
In the manual it says id sensor cleaning fan , i have replaced the fan with a working one from another machine, also i have troubleshot iob and all the power supply units thy are working, please help me out�� the error is persistant the machine does not even run on startup

[slimslob]

It could also be the ITB Motor Cooling Fan. See the FAN DEFECT DETECTION portion of the service manual. Since the two are located next to each other check for clogged ducts or filters that could causing the fan to fail to come up to speed.

[Chimatoner]

Solved, the error is caused by the drum face plate, its suppose to trigger a door switch, see attachement

[bat]

Solved, the error is caused by the drum face plate, its suppose to trigger a door switch, see attachement

Thank you for this, I've been struggling with this problem for a while.

[M.wagih]

Thank you for this, I've been struggling with this problem for a while.

I have the same airbrush, but with a Ricoh Pro C7100 machine، Can you help?

[bat]

I have the same airbrush, but with a Ricoh Pro C7100 machine، Can you help?

problem

I need more info about your problem...

[slimslob]

problem

I need more info about your problem...

Maybe he should start his own thread instead of grave robbing one that is almost 5 years old/