Thanks Thanks:  0
Dislikes Dislikes:  0
Results 1 to 3 of 3
  1. #1
    Junior Member
    Join Date
    Jun 2020
    Location
    Hsinchu
    Posts
    1
    Rep Power
    0

    Ricoh MP7500 - During the copying, the value of Vref did not change

    Ricoh MP7500

    After TD sensor initial setting, the value of Vref is less than 250. (EX1: Vref=109, Vt=278 or EX2: Vref=149, Vt=80)

    Every 2000 copy cycle record Vref and Vt value
    The value didn't change until it is copied to 10,000 sheets.

    EX1:
    2k copy Vref=109,Vt=7
    4k copy Vref=109,Vt=13 --->image density is too high, so stopped the copy

    EX2:
    2k copy Vref=149,Vt=62
    4k copy Vref=149,Vt=33
    6k copy Vref=149,Vt=37
    8k copy Vref=149,Vt=35
    10k copy Vref=149,Vt=31 --->The usage of toner is higher than the normal time (TD sensor initial setting, Vref > 250)

    I don't know the reason to cause the situation. The situation (TD sensor initial setting, Vref < 250) doesn't appear for every time.

    Have you ever encountered a similar situation? Can you give me some advice?


    Thank you very much.

  2. #2
    Trusted Tech 50+ Posts UNICORNico's Avatar
    Join Date
    May 2018
    Location
    Murcia
    Posts
    59
    Rep Power
    5

    Re: Ricoh MP7500 - During the copying, the value of Vref did not change

    Quote Originally Posted by Tyng View Post
    Ricoh MP7500

    After TD sensor initial setting, the value of Vref is less than 250. (EX1: Vref=109, Vt=278 or EX2: Vref=149, Vt=80)

    Every 2000 copy cycle record Vref and Vt value
    The value didn't change until it is copied to 10,000 sheets.

    EX1:
    2k copy Vref=109,Vt=7
    4k copy Vref=109,Vt=13 --->image density is too high, so stopped the copy

    EX2:
    2k copy Vref=149,Vt=62
    4k copy Vref=149,Vt=33
    6k copy Vref=149,Vt=37
    8k copy Vref=149,Vt=35
    10k copy Vref=149,Vt=31 --->The usage of toner is higher than the normal time (TD sensor initial setting, Vref > 250)

    I don't know the reason to cause the situation. The situation (TD sensor initial setting, Vref < 250) doesn't appear for every time.

    Have you ever encountered a similar situation? Can you give me some advice?


    Thank you very much.
    The Developer may be defective, or not OEM.
    Have you only changed the Developer?
    Didn't you do the Full Preventive?
    You should keep in mind that, along with the Developer, you should add the rest of the pieces for their best quality response.
    - Drum + Sheet + Crown Crane + Crown Thread

    PS: A detail that is overlooked.
    You've cleaned the toner density sensor from the drum???
    Check if the "anti-spill" of the drum unit is ok. And it doesn't generate dirt on that sensor.

    Last edited by UNICORNico; 06-04-2020 at 12:33 PM.
    ​Apologies for my English, it's not my mother tongue and I'm helping the translator.
    ALL WILL BE WELL

  3. #3
    Retired 10,000+ Posts slimslob's Avatar
    Join Date
    May 2013
    Location
    Bakersfield, CA
    Posts
    11,645
    Rep Power
    280

    Re: Ricoh MP7500 - During the copying, the value of Vref did not change

    The very first thing you should have done was to properly clean the ID sensor.
    1. Brush and wipe all spewed toner from the PCU frame. If yu try to use a vacuum, stay at least 2 inches away from the sensor as static generated by vacuuming the toner will damage the sensor.
    2. It there is a lot of toner on the sensor itself use a camera lens brush with air bulb to remove.
    3. Wipe the sensor off with a soft cotton cloth slightly moistened with water only. Fabric other than cotton can create static and damage the sensor. Glass cleaner can leave a film and solvents like alcohol can damage the sensor.

    If the sensor has been damaged by improper cleaning in the past, replace it. Run SP 3001-002.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here