Results 1 to 5 of 5
  1. #1
    Service Manager 1,000+ Posts
    Join Date
    Jun 2012
    Location
    Turnhout
    Posts
    1,662
    Rep Power
    48

    c3002 re-use a (almost) new develoment unit

    c3002 development unit initialization performed and only 10 printouts done.
    Can i re-use this development unit?
    The total cost for making a 3002 machine ready for sale here, are to high and perhaps we can re-use the dev.unit.
    Thanks - again - for your answer.

  2. #2
    Senior Tech 250+ Posts tjvincent's Avatar
    Join Date
    Apr 2008
    Location
    Green Bay, WI
    Posts
    280
    Rep Power
    37

    Re: c3002 re-use a (almost) new develoment unit

    Yes that's reusable, put it in another machine and tell it it's a new unit.

  3. #3
    Service Manager 1,000+ Posts
    Join Date
    Jun 2012
    Location
    Turnhout
    Posts
    1,662
    Rep Power
    48

    Re: c3002 re-use a (almost) new develoment unit

    In the early day's you used the readings of the vsp & vsg and put those values in the other machine ...
    Is it still possible?
    Perhaps - as mentioned here before - just put it in, initialize it, and oeps, ready?
    ???

  4. #4
    Copier Technician 1,000+ Posts
    c3002 re-use a (almost) new develoment unit

    mga's Avatar
    Join Date
    Dec 2010
    Location
    london
    Posts
    1,393
    Rep Power
    135

    Re: c3002 re-use a (almost) new develoment unit

    Quote Originally Posted by Mark Bbb View Post
    c3002 development unit initialization performed and only 10 printouts done.
    Can i re-use this development unit?
    The total cost for making a 3002 machine ready for sale here, are to high and perhaps we can re-use the dev.unit.
    Thanks - again - for your answer.
    Yes should be fine but setup as new
    Regards Mark

    FOR TRADE AND END USER SERVICE CALLS PLEASE VISIT WEB SITE FOR CONTACT DETAILS. COVERING GREATER LONDON {UK} AND ALL SURROUNDING COUNTIES.

    RICOH, CANON, KYOCERA, KONICA, SHARP, HP/SAMSUNG BROTHER, LEXMARK.

    https://copierservices.simdif.com

  5. #5
    Service Manager 1,000+ Posts fshead's Avatar
    Join Date
    Jan 2009
    Location
    nyc
    Posts
    2,339
    Rep Power
    80

    Re: c3002 re-use a (almost) new develoment unit

    I swap dev units and drums all the time as long as they arent worn out.
    Sometimes i will run a few test sheets and if not good black fill i will do a k forced toner feed and reprint test till it looks solid.
    And then i tell machine new unit both drum n dev unit and repower up..
    You can change just the developer powder too if needed

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here