Ricoh MP2553 prints blank copies. This started after client installed new toner.
Ricoh MP2553 prints blank copies. This started after client installed new toner.
There's no logical reason that this would happen simply from replacing a toner bottle in this model.
....and it sounds like you haven't even gone to look at it.
How about doing that and then actually providing some proper information if you can't resolve it!
The only reason that I know of where just replacing the toner bottle would cause blank copies would be if there was a lot of spewed toner on the toner bottle holder rails and it got dumped down onto the entire length of the shield glass. If that is the case do not remove the shield glass to clean it until you have vacuumed all the toner on, above and around the glass. If toner falls into the laser housing you will have a major problem.
hi
Make a print and stop it midway. Open the right door and check if there is image on the drum. If not start by checking if the gear that turns the mag roller on the back of the pcu is there. If that is missing there will be no image on the drum.
Press the GREEN button!!
It is not detecting toner when doing the ID check
=> problem with toner supply:
OR it is blocked somewhere OR drum / developer bias roller is not turning.
drum charge problem
Bookmarks