Results 1 to 6 of 6
  1. #1
    Senior Tech 250+ Posts
    Join Date
    Jul 2009
    Location
    Den Bosch
    Posts
    308
    Rep Power
    0

    MPC307 leading edge

    HI

    When copying or printing more then one prints, the registration is not correct.
    Sometimes it is 1 or 2 inches below the head . . .

    Does this mean that the registration clutch need to be changed?
    only 5K on the counter . . .?

    Thanks in advance

  2. #2
    Service Manager 2,500+ Posts TonerMunkeh's Avatar
    Join Date
    Apr 2008
    Posts
    3,453
    Rep Power
    84

    Re: MPC307 leading edge

    That is usually caused by the side door, the hooks that latch onto the transfer unit have a shaft that runs through the middle of them twists and the door doesn't latch correctly.
    Computers are serious tools, Michael!

  3. #3
    Senior Tech 250+ Posts
    Join Date
    Jul 2009
    Location
    Den Bosch
    Posts
    308
    Rep Power
    0

    Re: MPC307 leading edge

    You're sure about that, because the side door closes correct . . .

    Quote Originally Posted by TonerMunkeh View Post
    That is usually caused by the side door, the hooks that latch onto the transfer unit have a shaft that runs through the middle of them twists and the door doesn't latch correctly.

  4. #4
    Service Manager 5,000+ Posts
    MPC307 leading edge

    Phil B.'s Avatar
    Join Date
    Jul 2016
    Location
    Raleigh NC
    Posts
    8,262
    Rep Power
    177

    Re: MPC307 leading edge

    Quote Originally Posted by GeorgeBest View Post
    HI

    When copying or printing more then one prints, the registration is not correct.
    Sometimes it is 1 or 2 inches below the head . . .

    Does this mean that the registration clutch need to be changed?
    only 5K on the counter . . .?

    Thanks in advance
    George,

    is there an error code?

    do the paper types/sizes/weights match on PC & copier/printer settings?

    what have you done?

    cleaned sensors?
    feeds?
    registration assmy?

    are all bushings/springs/clips in place?
    paper guides tight against media?

    so many questions... so little info.

    Phil B. "The Dentist"

  5. #5
    Senior Tech 250+ Posts
    Join Date
    Jul 2009
    Location
    Den Bosch
    Posts
    308
    Rep Power
    0

    Re: MPC307 leading edge

    Hi Phil,

    no error code,
    paper sizes are correct, first copy and print always good, more then one it gives an registration fault without an error, not always . .

    Cleaned pickup and registration roller, and checked the ITB unit

    paper guides allright, just one cassette

    bushes seems to be in place, again first copy/print always good.

    registration clutch not in store, think its the clutch, but with 5K on the counter?






    Quote Originally Posted by Phil B. View Post
    George,

    is there an error code?

    do the paper types/sizes/weights match on PC & copier/printer settings?

    what have you done?

    cleaned sensors?
    feeds?
    registration assmy?

    are all bushings/springs/clips in place?
    paper guides tight against media?

    so many questions... so little info.

    Phil B. "The Dentist"

  6. #6
    Service Manager 5,000+ Posts
    MPC307 leading edge

    Phil B.'s Avatar
    Join Date
    Jul 2016
    Location
    Raleigh NC
    Posts
    8,262
    Rep Power
    177

    Re: MPC307 leading edge

    Quote Originally Posted by GeorgeBest View Post
    Hi Phil,

    no error code,
    paper sizes are correct, first copy and print always good, more then one it gives an registration fault without an error, not always . .

    Cleaned pickup and registration roller, and checked the ITB unit

    paper guides allright, just one cassette

    bushes seems to be in place, again first copy/print always good.

    registration clutch not in store, think its the clutch, but with 5K on the counter?
    ok then next thing i would check is that all wire harnesses are pulled reconnected (with pwr off)

    clean the feeds/make sure they ae locked in place.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here