Let us eat, drink, and be merry, because tomorrow we may die!
For all your firmware & service manual needs please visit us at:
www.copierfirmware.co.uk - www.printerfirmware.co.uk
Regards Mark
FOR TRADE AND END USER SERVICE CALLS PLEASE VISIT WEB SITE FOR CONTACT DETAILS. COVERING GREATER LONDON {UK} AND ALL SURROUNDING COUNTIES.
RICOH, CANON, KYOCERA, KONICA, SHARP, HP/SAMSUNG BROTHER, LEXMARK.
https://copierservices.simdif.com
Let us eat, drink, and be merry, because tomorrow we may die!
For all your firmware & service manual needs please visit us at:
www.copierfirmware.co.uk - www.printerfirmware.co.uk
mpc306:
pcdu color = 40K
pcdu black = 60K
ITB & PTR & F.U. & feed rollers = 120K (is it possible to replace separate F.U. parts?)
Can those parts last (much) longer?
Thank you - again - for your help!
ITB and PTR usually last far longer than what they're rated - You'll ocasionally need to vacuum the ITB cleaning unit as it will gather paper dust and start dropping on the printouts.
Fuser Unit - The pressure roller is usually the first thing to go, along with the gears. The gears can usually be rotated 180º horizontally to buy you some time until you get new ones; the pressure roller was too expensive to replace by itself instead of the complete fuser unit (don't know if this is still valid) - but it will usually outlast the specified life by a good margin.
' "But the salesman said . . ." The salesman's an asshole!'
Mascan42
'You will always find some Eskimo ready to instruct the Congolese on how to cope with heat waves.'
Ibid
I'm just an ex-tech lurking around and spreading disinformation!
Last question:
Do you know a supplier for 9x mpc306 (or c401)?
ADF installed, 1 tray only.
New, or second hand if in good state.
Shipment to Europe, Belgium, before the 20 of august.
PS: I have already started a thread in "buy, sale,..."
But perhaps you can help us out...
Thanks - again - in advance.
Bookmarks