Results 1 to 10 of 10
  1. #1
    Senior Tech 250+ Posts
    Join Date
    Sep 2013
    Location
    Burleson
    Posts
    493
    Rep Power
    27

    MP C305 Home button

    I have a 305 that when i press the home button it just beeps at me. So i can't get to any of my applications unless i have the side buttons as a shortcut, which it only has three, so i have to choose 3 out of my usual 5. I updated the firmware.
    I set the function priority to home but it still stays on the copier screen.

  2. #2
    Service Manager 5,000+ Posts
    MP C305 Home button

    copier tech's Avatar
    Join Date
    Jan 2014
    Location
    London
    Posts
    7,531
    Rep Power
    182

    Re: MP C305 Home button

    Quote Originally Posted by ABS tect View Post
    I have a 305 that when i press the home button it just beeps at me. So i can't get to any of my applications unless i have the side buttons as a shortcut, which it only has three, so i have to choose 3 out of my usual 5. I updated the firmware.
    I set the function priority to home but it still stays on the copier screen.
    Sounds like you have user/admin authentication set?
    Let us eat, drink, and be merry, because tomorrow we may die!

    For all your firmware & service manual needs please visit us at:

    www.copierfirmware.co.uk - www.printerfirmware.co.uk




  3. #3
    It's not easy being green 1,000+ Posts Cipher's Avatar
    Join Date
    May 2006
    Posts
    1,309
    Rep Power
    57

    Re: MP C305 Home button

    System Settings > General Features > Function Priority

    - Specify the mode to be displayed immediately after the operation switch is turned on, or when System Reset mode is turned on.

    Default: [Home]

    Or you could try restoring the [Home] screen defaults.
    • Knowledge not shared, is eventually knowledge that becomes lost... like tears in the rain.

    Fully qualified technician for Ricoh - Canon - Sharp - HP - Brother

  4. #4
    Senior Tech 250+ Posts
    Join Date
    Sep 2013
    Location
    Burleson
    Posts
    493
    Rep Power
    27

    Re: MP C305 Home button

    Thanks for the response i will try in the morning and get back to you.

  5. #5
    Senior Tech 250+ Posts
    Join Date
    Sep 2013
    Location
    Burleson
    Posts
    493
    Rep Power
    27

    Re: MP C305 Home button

    Neither of those worked...could it be firmware? Maybe the actual display unit is bad?

    Edit: I set the system reset to 10 seconds...when 10 seconds pass it returns to the home screen (which I set as the function priority). But when I'm on the copier screen or something else and hit the home button...it just beeps at me as if nothing has been programmed for that button

  6. #6
    Service Manager 1,000+ Posts
    MP C305 Home button

    FrohnB's Avatar
    Join Date
    Jul 2017
    Location
    Nebraska, USA ------ GO BIG RED
    Posts
    1,919
    Rep Power
    126

    Re: MP C305 Home button

    I would start with firmware. I don't see anything in the f/w history for that symptom, and haven't personally run into it with this machine, but it's worth a shot.
    If the button beeps when you push it, then i think we can rule out the board in the op panel.
    If firmware doesn't do the trick, then i would be hunting for a setting somewhere in there that's causing it to do that. Like an "interrupt mode" or something like that.
    Omertà

  7. #7
    Technician
    Join Date
    Jun 2020
    Location
    Paris
    Posts
    12
    Rep Power
    8

    Re: MP C305 Home button

    Quote Originally Posted by FrohnB View Post
    I would start with firmware. I don't see anything in the f/w history for that symptom, and haven't personally run into it with this machine, but it's worth a shot.
    If the button beeps when you push it, then i think we can rule out the board in the op panel.
    If firmware doesn't do the trick, then i would be hunting for a setting somewhere in there that's causing it to do that. Like an "interrupt mode" or something like that.
    It 's a SP mode which was changed, I've had that once but i can't remember which SPmode, sorry. I'll have a look on monday .

  8. #8
    Technician
    Join Date
    Jun 2020
    Location
    Paris
    Posts
    12
    Rep Power
    8

    Re: MP C305 Home button

    Quote Originally Posted by frere View Post
    It 's a SP mode which was changed, I've had that once but i can't remember which SPmode, sorry. I'll have a look on monday .
    it could be the SP 5074

  9. #9
    Senior Tech 250+ Posts
    Join Date
    Sep 2012
    Location
    Turin
    Posts
    257
    Rep Power
    30

    Re: MP C305 Home button

    Quote Originally Posted by frere View Post
    it could be the SP 5074
    Right
    SP5074-091 should be 0

  10. #10
    Technician
    Join Date
    Jun 2020
    Location
    Paris
    Posts
    12
    Rep Power
    8

    Re: MP C305 Home button

    Quote Originally Posted by skynetto View Post
    Right
    SP5074-091 should be 0
    Thank you

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here