306z smbv2 and v3

[ABS tect]

why is it not holding when i select smbv2/smbv3 to be "active" and port number "445" under system settings, interface settings, smb client advanced settings.

It won't hold...tried going in as admin and still nothing. So i can't scan without enabling smb 1.0 which i don't do

[aktasson]

• SP5-728-040: Port number default 445(0), 139(1) --> 445=1
• SP5-728-041: default SMBv2/SMBv3 Active(0), Inactive(1) --> Active=1 ...
• Minimum FW Package D1965406Tv Ver.15.00
• Minimum reqired FW
  

  Model D219/D220/D214/D196/D236

  v1.15 D1965400S

  v15.27.1** D1965792J v15.28 *** D1965792K

  v01.19 D1965787L

  v1.12 D1965788K

  Animation v2.06 D1965790G

  
  already checked?

[ABS tect]

• SP5-728-040: Port number default 445(0), 139(1) --> 445=1
• SP5-728-041: default SMBv2/SMBv3 Active(0), Inactive(1) --> Active=1 ...
• Minimum FW Package D1965406Tv Ver.15.00
• Minimum reqired FW
  

  Model D219/D220/D214/D196/D236

  v1.15 D1965400S

  v15.27.1** D1965792J v15.28 *** D1965792K

  v01.19 D1965787L

  v1.12 D1965788K

  Animation v2.06 D1965790G

  
  already checked?

Thanks man...i believe my individual modules were not up to date but once i updated with package firmware all is well...

[mga]

I find it's better to update all individual firmware as some modules are more up to date than package

[slimslob]

I find it's better to update all individual firmware as some modules are more up to date than package

I have also found that if your MFP has a problem caused by a corrupted firmware module Package will not replace it as long as it is current.

[mga]

I have also found that if your MFP has a problem caused by a corrupted firmware module Package will not replace it as long as it is current.

The package firmware has always given more problems ricoh are always posting on technical not to install quite a lot

[ABS tect]

Yea i've found this issue interesting. I've always been the one to install the individual modules. However, if you've seen some of my recent threads, i've fixed the last two issues by loading the package firmware. One on this machine, and one on a MP C3503z.

That doesn't mean that package is the way to go...it could simply mean my individual ones were not all up to date (more than likely).

[slimslob]

Yea i've found this issue interesting. I've always been the one to install the individual modules. However, if you've seen some of my recent threads, i've fixed the last two issues by loading the package firmware. One on this machine, and one on a MP C3503z.

That doesn't mean that package is the way to go...it could simply mean my individual ones were not all up to date (more than likely).

Package firmware is the fastest(???) way to update a machine that has multiple firmware that are out of date.

[mga]

Package firmware is the fastest(???) way to update a machine that has multiple firmware that are out of date.

Fastest but not the most up-to-date