Page 2 of 2 FirstFirst 12
Results 11 to 16 of 16
  1. #11
    Ricoh Fanboy 1,000+ Posts Oze's Avatar
    Join Date
    Jul 2008
    Location
    Toowoomba,QLD
    Posts
    1,662
    Rep Power
    63

    Re: MP C4503 Finisher error

    Quote Originally Posted by mrwho View Post
    I know you said you tried with another finisher, but nevertheless check the feeler that sits between the sponge rollers, it might be stuck (in both finishers)
    ^ This and also check those mylars....nothing to say that they aren't deformed on both finishers.
    It's a stupid design.

  2. #12
    Service Manager 1,000+ Posts
    MP C4503 Finisher error


    Join Date
    Nov 2007
    Location
    New Jersey
    Posts
    1,661
    Rep Power
    86

    Re: MP C4503 Finisher error

    Check to make sure the flag is going into the sensor that senses the tray lower limit, make sure the tray is not crooked and jacked up on the rear side. Also the harness is a little too short and sometimes gets pulled part way out of the sensor.

  3. #13
    Service Manager 1,000+ Posts fshead's Avatar
    Join Date
    Jan 2009
    Location
    nyc
    Posts
    2,339
    Rep Power
    80

    Re: MP C4503 Finisher error

    id swap in a known working bridge unit..
    just to be sure

  4. #14
    Technician
    Join Date
    Jun 2020
    Location
    Paris
    Posts
    12
    Rep Power
    8

    Re: MP C4503 Finisher error

    Quote Originally Posted by iscott View Post
    Works fine with paper from tray 1 long side first. If you sent any other orientation letterR Legal or 11x17 you get the message "Remove paper from shift tray" But there is no paper in the shift tray. The message pops up as soon as the paper ejects into the shift tray. Firmware is up o date and have swapped finishers so that's not it.
    The message is it " Remove paper from shift tray because it's full " or remove a paper jam.
    Try to exit the paper on the superior tray to see if it works.

  5. #15
    Copier Technician 1,000+ Posts
    MP C4503 Finisher error

    mga's Avatar
    Join Date
    Dec 2010
    Location
    london
    Posts
    1,393
    Rep Power
    135

    Re: MP C4503 Finisher error

    Quote Originally Posted by iscott View Post
    Works fine with paper from tray 1 long side first. If you sent any other orientation letterR Legal or 11x17 you get the message "Remove paper from shift tray" But there is no paper in the shift tray. The message pops up as soon as the paper ejects into the shift tray. Firmware is up o date and have swapped finishers so that's not it.
    Look at the paper height sensor actuator in the exit assembly you move out the way when installing Bridge unit
    Regards Mark

    FOR TRADE AND END USER SERVICE CALLS PLEASE VISIT WEB SITE FOR CONTACT DETAILS. COVERING GREATER LONDON {UK} AND ALL SURROUNDING COUNTIES.

    RICOH, CANON, KYOCERA, KONICA, SHARP, HP/SAMSUNG BROTHER, LEXMARK.

    https://copierservices.simdif.com

  6. #16
    Major Asshole! 2,500+ Posts
    MP C4503 Finisher error

    mrwho's Avatar
    Join Date
    Apr 2009
    Location
    Combing the desert!
    Posts
    4,293
    Rep Power
    86

    Re: MP C4503 Finisher error

    Quote Originally Posted by mga View Post
    Look at the paper height sensor actuator in the exit assembly you move out the way when installing Bridge unit
    +1

    Never ocurred to me - but it might explain why you're having that problem with two different finishers.
    ' "But the salesman said . . ." The salesman's an asshole!'
    Mascan42

    'You will always find some Eskimo ready to instruct the Congolese on how to cope with heat waves.'

    Ibid

    I'm just an ex-tech lurking around and spreading disinformation!

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here