Page 1 of 3 123 LastLast
Results 1 to 10 of 29
  1. #1
    Service Manager 1,000+ Posts
    Mpc4502a With single pass feeder sc700-00

    mrfuser's Avatar
    Join Date
    May 2007
    Posts
    1,557
    Rep Power
    51

    Mpc4502a With single pass feeder sc700-00

    Client got a small sticky stuck in the machine and they removed it before I got there. Unfortunatley it then started to go into an sc700-00 condition randomly. I went through the feeder and did not find anything else stuck in there. Pulled the covers and checked gears and they all look good. I ran a couple of hundred through it fine then two hours later they call back with the same problem. Any thoughts ?

  2. #2
    Service Manager 5,000+ Posts
    Mpc4502a With single pass feeder sc700-00

    copier tech's Avatar
    Join Date
    Jan 2014
    Location
    London
    Posts
    7,531
    Rep Power
    182

    Re: Mpc4502a With single pass feeder sc700-00

    Quote Originally Posted by mrfuser View Post
    Client got a small sticky stuck in the machine and they removed it before I got there. Unfortunatley it then started to go into an sc700-00 condition randomly. I went through the feeder and did not find anything else stuck in there. Pulled the covers and checked gears and they all look good. I ran a couple of hundred through it fine then two hours later they call back with the same problem. Any thoughts ?
    I don't see a SC700-00 in the service manual. Are you sure it is SC700-'00'
    Let us eat, drink, and be merry, because tomorrow we may die!

    For all your firmware & service manual needs please visit us at:

    www.copierfirmware.co.uk - www.printerfirmware.co.uk




  3. #3
    Major Asshole! 2,500+ Posts
    Mpc4502a With single pass feeder sc700-00

    mrwho's Avatar
    Join Date
    Apr 2009
    Location
    Combing the desert!
    Posts
    4,293
    Rep Power
    86

    Re: Mpc4502a With single pass feeder sc700-00

    Quote Originally Posted by copier tech View Post
    I don't see a SC700-00 in the service manual. Are you sure it is SC700-'00'
    Indeed - SC700 start at 01 (both on the manual and on my-ricoh). If the machine is indeed giving out that error, then I'd start asking questions - where did the customer remove that sticky residue from, what kind of residue it was and, most importantly, if it's a foreign substance, billing the customer is probably not out of the question.
    ' "But the salesman said . . ." The salesman's an asshole!'
    Mascan42

    'You will always find some Eskimo ready to instruct the Congolese on how to cope with heat waves.'

    Ibid

    I'm just an ex-tech lurking around and spreading disinformation!

  4. #4
    Service Manager 1,000+ Posts
    Mpc4502a With single pass feeder sc700-00

    GIUBOSS's Avatar
    Join Date
    Jul 2013
    Location
    Rome, IT
    Posts
    1,299
    Rep Power
    68

    Re: Mpc4502a With single pass feeder sc700-00

    Quote Originally Posted by mrfuser View Post
    Client got a small sticky stuck in the machine and they removed it before I got there. Unfortunatley it then started to go into an sc700-00 condition randomly. I went through the feeder and did not find anything else stuck in there. Pulled the covers and checked gears and they all look good. I ran a couple of hundred through it fine then two hours later they call back with the same problem. Any thoughts ?
    have you cleaned all the photosensors and around them? All the rollers?

  5. #5
    Service Manager 1,000+ Posts
    Mpc4502a With single pass feeder sc700-00

    mrfuser's Avatar
    Join Date
    May 2007
    Posts
    1,557
    Rep Power
    51

    Re: Mpc4502a With single pass feeder sc700-00

    Sorry, typo it is 700-01. I went through and cleaned everything and am going back again today and will check again. I personally ran a couple of hundred pages and it worked perfect and as I said they called back a couple of hours later stating that code came back. Thank you all for any tips.

  6. #6
    Service Manager 1,000+ Posts
    Mpc4502a With single pass feeder sc700-00

    GIUBOSS's Avatar
    Join Date
    Jul 2013
    Location
    Rome, IT
    Posts
    1,299
    Rep Power
    68

    Re: Mpc4502a With single pass feeder sc700-00

    Quote Originally Posted by mrfuser View Post
    Sorry, typo it is 700-01. I went through and cleaned everything and am going back again today and will check again. I personally ran a couple of hundred pages and it worked perfect and as I said they called back a couple of hours later stating that code came back. Thank you all for any tips.
    try to unhook it from the machine and shake it upside down.

  7. #7
    Major Asshole! 2,500+ Posts
    Mpc4502a With single pass feeder sc700-00

    mrwho's Avatar
    Join Date
    Apr 2009
    Location
    Combing the desert!
    Posts
    4,293
    Rep Power
    86

    Re: Mpc4502a With single pass feeder sc700-00

    Quote Originally Posted by GIUBOSS View Post
    try to unhook it from the machine and shake it upside down.
    This looks silly, but it's actually a good advise imho.
    ' "But the salesman said . . ." The salesman's an asshole!'
    Mascan42

    'You will always find some Eskimo ready to instruct the Congolese on how to cope with heat waves.'

    Ibid

    I'm just an ex-tech lurking around and spreading disinformation!

  8. #8
    Service Manager 1,000+ Posts
    Mpc4502a With single pass feeder sc700-00

    mrfuser's Avatar
    Join Date
    May 2007
    Posts
    1,557
    Rep Power
    51

    Re: Mpc4502a With single pass feeder sc700-00

    I went back today and ran over 900 pages through the feeder without a single problem so I guess whatever was in there worked its way out

  9. #9
    Service Manager 5,000+ Posts tsbservice's Avatar
    Join Date
    May 2007
    Posts
    7,100
    Rep Power
    346

    Re: Mpc4502a With single pass feeder sc700-00

    Quote Originally Posted by GIUBOSS View Post
    try to unhook it from the machine and shake it upside down.
    Quote Originally Posted by mrwho View Post
    This looks silly, but it's actually a good advise imho.
    Imho it may work and it may be terrible depending on Chaos theory. You know all that stuff laying inside will find new places hopefully outside DF but sometimes inside. That been said I also consider the idea, never thought of that
    A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.

    Blessed are they who can laugh at themselves, for they shall never cease to be amused.

    I don't reply to private messages from end users.

  10. #10
    Senior Tech 2,500+ Posts
    Mpc4502a With single pass feeder sc700-00

    mikadonovan's Avatar
    Join Date
    May 2008
    Location
    Indianapolis, Indiana
    Posts
    2,920
    Rep Power
    99

    Re: Mpc4502a With single pass feeder sc700-00

    Quote Originally Posted by GIUBOSS View Post
    try to unhook it from the machine and shake it upside down.
    That's easier said than done with the SPDF, but if you do, be prepared for the rain of paper clips and old staples.
    NEVER ASSUME ANYTHING

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here