Page 3 of 3 FirstFirst 123
Results 21 to 29 of 29
  1. #21
    Senior Tech 2,500+ Posts
    Mpc4502a With single pass feeder sc700-00

    mikadonovan's Avatar
    Join Date
    May 2008
    Location
    Indianapolis, Indiana
    Posts
    2,920
    Rep Power
    99

    Re: Mpc4502a With single pass feeder sc700-00

    Quote Originally Posted by mrfuser View Post
    Power seems ok. This time they left it in error code and I noticed the lift table was in the up position and not reset back down. After power cycle it went back down. Both sensors and motor and gears for this operation all seem fine when am tested and inspected now. I cleaned them also to make sure. Baffling these modern machines eh? Lol
    Not too baffling. Replace the sensors, including the upper limit sensor located at the rear side of the adf on the frame. You can see it when you open the adf cover. The lift table moves up, lifts the primary feed assembly up and stops when the flag blocks the sensor. If it is driving past and coding, the sensor is most likely bad or getting weak.
    NEVER ASSUME ANYTHING

  2. #22
    Copier Technician 1,000+ Posts
    Mpc4502a With single pass feeder sc700-00

    mga's Avatar
    Join Date
    Dec 2010
    Location
    london
    Posts
    1,393
    Rep Power
    135

    Re: Mpc4502a With single pass feeder sc700-00

    Quote Originally Posted by mikadonovan View Post
    Not too baffling. Replace the sensors, including the upper limit sensor located at the rear side of the adf on the frame. You can see it when you open the adf cover. The lift table moves up, lifts the primary feed assembly up and stops when the flag blocks the sensor. If it is driving past and coding, the sensor is most likely bad or getting weak.
    +1 come on sometimes we have to replace parts
    Regards Mark

    FOR TRADE AND END USER SERVICE CALLS PLEASE VISIT WEB SITE FOR CONTACT DETAILS. COVERING GREATER LONDON {UK} AND ALL SURROUNDING COUNTIES.

    RICOH, CANON, KYOCERA, KONICA, SHARP, HP/SAMSUNG BROTHER, LEXMARK.

    https://copierservices.simdif.com

  3. #23
    Service Manager 1,000+ Posts
    Mpc4502a With single pass feeder sc700-00

    mrfuser's Avatar
    Join Date
    May 2007
    Posts
    1,557
    Rep Power
    51

    Re: Mpc4502a With single pass feeder sc700-00

    SPDF D642 Parts manual? I have gone through my manuals and can not find one for the parts for the SPDF anywhere. Does anyone have one ? I seem to have every parts and service manual for ricoh and not that one of course! I want to order the lift motor and sensors for that unit.


    Thank you!

  4. #24
    Major Asshole! 2,500+ Posts
    Mpc4502a With single pass feeder sc700-00

    mrwho's Avatar
    Join Date
    Apr 2009
    Location
    Combing the desert!
    Posts
    4,293
    Rep Power
    86

    Re: Mpc4502a With single pass feeder sc700-00

    I never had to replace one of those, so I'm not sure, but it looks to me it's the stepper motor mentioned here. You need to look at it and compare to the one you have.
    ' "But the salesman said . . ." The salesman's an asshole!'
    Mascan42

    'You will always find some Eskimo ready to instruct the Congolese on how to cope with heat waves.'

    Ibid

    I'm just an ex-tech lurking around and spreading disinformation!

  5. #25
    Service Manager 1,000+ Posts
    Mpc4502a With single pass feeder sc700-00

    mrfuser's Avatar
    Join Date
    May 2007
    Posts
    1,557
    Rep Power
    51

    Re: Mpc4502a With single pass feeder sc700-00

    ok that link is a virus! ?!????

    Quote Originally Posted by mrwho View Post
    I never had to replace one of those, so I'm not sure, but it looks to me it's the stepper motor mentioned here. You need to look at it and compare to the one you have.

  6. #26
    Major Asshole! 2,500+ Posts
    Mpc4502a With single pass feeder sc700-00

    mrwho's Avatar
    Join Date
    Apr 2009
    Location
    Combing the desert!
    Posts
    4,293
    Rep Power
    86

    Re: Mpc4502a With single pass feeder sc700-00

    Quote Originally Posted by mrfuser View Post
    ok that link is a virus! ?!????
    It's some webpage with manual pages - though it probably has ads of some sort...
    ' "But the salesman said . . ." The salesman's an asshole!'
    Mascan42

    'You will always find some Eskimo ready to instruct the Congolese on how to cope with heat waves.'

    Ibid

    I'm just an ex-tech lurking around and spreading disinformation!

  7. #27
    Retired 10,000+ Posts
    Mpc4502a With single pass feeder sc700-00

    slimslob's Avatar
    Join Date
    May 2013
    Location
    Bakersfield, CA
    Posts
    34,126
    Rep Power
    989

    Re: Mpc4502a With single pass feeder sc700-00

    Quote Originally Posted by mrfuser View Post
    SPDF D642 Parts manual? I have gone through my manuals and can not find one for the parts for the SPDF anywhere. Does anyone have one ? I seem to have every parts and service manual for ricoh and not that one of course! I want to order the lift motor and sensors for that unit.


    Thank you!
    If you are in North America and are an authorized Ricoh dealer, just pull up the TSRC page for the MP C4502. It will be listed with the other parts catalogs. Or go to rfg-esource and search D642. You can also search for rfg053220 on rfg-esource or if elsewhere in the world on Myricoh.

  8. #28
    Service Manager 5,000+ Posts
    Mpc4502a With single pass feeder sc700-00

    copier tech's Avatar
    Join Date
    Jan 2014
    Location
    London
    Posts
    7,531
    Rep Power
    182

    Re: Mpc4502a With single pass feeder sc700-00

    Quote Originally Posted by mrfuser View Post
    SPDF D642 Parts manual? I have gone through my manuals and can not find one for the parts for the SPDF anywhere. Does anyone have one ? I seem to have every parts and service manual for ricoh and not that one of course! I want to order the lift motor and sensors for that unit.


    Thank you!
    Here ya go.

    D143_D144_Single_Pass_DF.pdf
    Let us eat, drink, and be merry, because tomorrow we may die!

    For all your firmware & service manual needs please visit us at:

    www.copierfirmware.co.uk - www.printerfirmware.co.uk




  9. #29
    Service Manager 1,000+ Posts
    Mpc4502a With single pass feeder sc700-00

    mrfuser's Avatar
    Join Date
    May 2007
    Posts
    1,557
    Rep Power
    51

    Re: Mpc4502a With single pass feeder sc700-00

    Finally! Lower limit sensor was faulty. Replaced it and works perfect

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here