Hi guys.
Can someone confirm me if the right ITB stopper of MPC2800 code: B2236085 can fit in the MPC3002 ITB?
I dont have any 3002 in hand to check myself, and the one i'm going to service have the stopper broken.
Thank you.
Hi guys.
Can someone confirm me if the right ITB stopper of MPC2800 code: B2236085 can fit in the MPC3002 ITB?
I dont have any 3002 in hand to check myself, and the one i'm going to service have the stopper broken.
Thank you.
Last edited by skynetto; 07-13-2020 at 04:34 PM.
I think that stopper is basically interchangeable on all the ITB's that look like that from when the MPC2000 came out till the 3002 came out. So loads of models you can steal one off
Sent from my WAS-LX1 using Tapatalk
Thnx man. Will try it today and send feedback.
For some reason Ricoh in all their wisdom decided to only make the entire ITB unit available on the 02s. The part number for that part on 01s is the same as on the C2800. The part number for the 03s is D1496037.
OK. Confirmed guys. The stopper works there too.
The initial problem was SC460 followed by SC492. Seems the if the ITB is not firmly in place you get strange high voltage errors.
why not just use the maintenance kit transfer units for the 3002 PN: 407037
So much cheaper than rebuilding and comes complete with the cleaning unit
i would find cheap SPC830 ITB units and just swap the upper guides..
i think mpc2800/c3300/c3001/c3002 ITB units are all the same
Regards Mark
FOR TRADE AND END USER SERVICE CALLS PLEASE VISIT WEB SITE FOR CONTACT DETAILS. COVERING GREATER LONDON {UK} AND ALL SURROUNDING COUNTIES.
RICOH, CANON, KYOCERA, KONICA, SHARP, HP/SAMSUNG BROTHER, LEXMARK.
https://copierservices.simdif.com
Bookmarks