Page 1 of 2 12 LastLast
Results 1 to 10 of 11
  1. #1
    Junior Member
    Join Date
    Jun 2020
    Location
    Suva
    Posts
    7
    Rep Power
    0

    Ricoh MP4055 japanese language after replacing NVRAM In IOB Board

    Hi guys

    A clients MP4055 emitted SC544-02.

    We have changed fuser and executed the following:
    1) SP5,810-002
    2) SP3,701-116

    there was no change.

    We have had to change NVRAM in IOB and the error condition SC544-02 has been removed after We have entered the serial number.

    but now we are getting the error Code SC195 and the SP mode is in Japanese.

    any idea how to resolve this?


    IMG_0746.JPGIMG_0747.JPG


  2. #2
    Trusted Tech 50+ Posts
    Join Date
    Jul 2016
    Posts
    60
    Rep Power
    17

    Re: Ricoh MP4055 japanese language after replacing NVRAM In IOB Board

    What was the P/N of the board installed? Different regions have different p/n for the same board.

  3. #3
    Service Manager 1,000+ Posts
    Join Date
    Oct 2011
    Location
    Hunter Valley, NSW
    Posts
    1,020
    Rep Power
    57

    Re: Ricoh MP4055 japanese language after replacing NVRAM In IOB Board

    Quote Originally Posted by Rahul_spbs View Post
    Hi guys

    A clients MP4055 emitted SC544-02.

    We have changed fuser and executed the following:
    1) SP5,810-002
    2) SP3,701-116

    there was no change.

    We have had to change NVRAM in IOB and the error condition SC544-02 has been removed after We have entered the serial number.

    but now we are getting the error Code SC195 and the SP mode is in Japanese.

    any idea how to resolve this?


    IMG_0746.JPGIMG_0747.JPG

    Was it a new genuine fuser or used one. Did you just change fusing sleeve and not change fuse. Did you follow procedure in manual.
    Why the heck would you change the NVRAM.

  4. #4
    Retired 10,000+ Posts
    Ricoh MP4055 japanese language after replacing NVRAM In IOB Board

    slimslob's Avatar
    Join Date
    May 2013
    Location
    Bakersfield, CA
    Posts
    34,132
    Rep Power
    989

    Re: Ricoh MP4055 japanese language after replacing NVRAM In IOB Board

    Clicking the upper right hand corner of the SP screen will allow you to select the SP language. The box with the with the oriental character and a 7. The 7 is the language number currently set. If I remember correctly, it is stored in the NVRAM and defaults to the language Ricoh has chosen for the region in which the NVRAM is to be sold.

  5. #5
    Major Asshole! 2,500+ Posts
    Ricoh MP4055 japanese language after replacing NVRAM In IOB Board

    mrwho's Avatar
    Join Date
    Apr 2009
    Location
    Combing the desert!
    Posts
    4,293
    Rep Power
    86

    Re: Ricoh MP4055 japanese language after replacing NVRAM In IOB Board

    Quote Originally Posted by slimslob View Post
    Clicking the upper right hand corner of the SP screen will allow you to select the SP language. The box with the with the oriental character and a 7. The 7 is the language number currently set. If I remember correctly, it is stored in the NVRAM and defaults to the language Ricoh has chosen for the region in which the NVRAM is to be sold.
    Isn't that the "Exit" or "Return" button?
    ' "But the salesman said . . ." The salesman's an asshole!'
    Mascan42

    'You will always find some Eskimo ready to instruct the Congolese on how to cope with heat waves.'

    Ibid

    I'm just an ex-tech lurking around and spreading disinformation!

  6. #6
    Major Asshole! 2,500+ Posts
    Ricoh MP4055 japanese language after replacing NVRAM In IOB Board

    mrwho's Avatar
    Join Date
    Apr 2009
    Location
    Combing the desert!
    Posts
    4,293
    Rep Power
    86

    Re: Ricoh MP4055 japanese language after replacing NVRAM In IOB Board

    Enter Factory Mode (you should know how, I guess) and change SP 5996-1 to your area (Europe would be 3).
    ' "But the salesman said . . ." The salesman's an asshole!'
    Mascan42

    'You will always find some Eskimo ready to instruct the Congolese on how to cope with heat waves.'

    Ibid

    I'm just an ex-tech lurking around and spreading disinformation!

  7. #7
    Service Manager 1,000+ Posts
    Ricoh MP4055 japanese language after replacing NVRAM In IOB Board

    FrohnB's Avatar
    Join Date
    Jul 2017
    Location
    Nebraska, USA ------ GO BIG RED
    Posts
    1,919
    Rep Power
    126

    Re: Ricoh MP4055 japanese language after replacing NVRAM In IOB Board

    Did you put in a NEW fuser? Or just swapped with a different used fuser?
    Usually for that code you need a reset fuse connected in the fuser, and execute 5-810-002 (high temp reset).
    If you did install a new fuser, that should have the fuse in it. Install it and THEN execute 5-810-002. It will not work if you do the SP mode first, turn off machine and install fuser and turn back on (speaking from experience).
    install the original nvram and try what I mentioned.
    Omertà

  8. #8
    Retired 10,000+ Posts
    Ricoh MP4055 japanese language after replacing NVRAM In IOB Board

    slimslob's Avatar
    Join Date
    May 2013
    Location
    Bakersfield, CA
    Posts
    34,132
    Rep Power
    989

    Re: Ricoh MP4055 japanese language after replacing NVRAM In IOB Board

    Quote Originally Posted by mrwho View Post
    Enter Factory Mode (you should know how, I guess) and change SP 5996-1 to your area (Europe would be 3).
    According to his profile he is in the capital city of Figi. Figi is an island in the South Pacific, definitely not Europe.

  9. #9
    Junior Member
    Join Date
    Jun 2020
    Location
    Suva
    Posts
    7
    Rep Power
    0

    Re: Ricoh MP4055 japanese language after replacing NVRAM In IOB Board

    Quote Originally Posted by FrohnB View Post
    Did you put in a NEW fuser? Or just swapped with a different used fuser?
    Usually for that code you need a reset fuse connected in the fuser, and execute 5-810-002 (high temp reset).
    If you did install a new fuser, that should have the fuse in it. Install it and THEN execute 5-810-002. It will not work if you do the SP mode first, turn off machine and install fuser and turn back on (speaking from experience).
    install the original nvram and try what I mentioned.

    a new fuser was installed. but we still had no luck.

    for some reason the Code gets stuck on the NVRAM and we are forced to change for the machine to release.

    anyways, we got it in the end.

    SC5807 region set to 7 and SP5811-002 and 004 to sort out S/N.SP5811-SP5811-002 and 002002 and SP5811-004

  10. #10
    Major Asshole! 2,500+ Posts
    Ricoh MP4055 japanese language after replacing NVRAM In IOB Board

    mrwho's Avatar
    Join Date
    Apr 2009
    Location
    Combing the desert!
    Posts
    4,293
    Rep Power
    86

    Re: Ricoh MP4055 japanese language after replacing NVRAM In IOB Board

    Thank you for the feedback.
    ' "But the salesman said . . ." The salesman's an asshole!'
    Mascan42

    'You will always find some Eskimo ready to instruct the Congolese on how to cope with heat waves.'

    Ibid

    I'm just an ex-tech lurking around and spreading disinformation!

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here