Ricoh Mpw 2400 CIS

[xpert copy]

hi I got really problem on CiS. I have problem in one Cis that print 4" black vertical Line. so i did copy in long way potriat . after long time i got cis and change it. then the problem occur. all the 5 cis not working so i check all the cable the PUI board and all. please give some advice cause of lockdown i cannot get any items from aboard .. plz plz help me

[Polarbear]

hi I got really problem on CiS. I have problem in one Cis that print 4" black vertical Line. so i did copy in long way potriat . after long time i got cis and change it. then the problem occur. all the 5 cis not working so i check all the cable the PUI board and all. please give some advice cause of lockdown i cannot get any items from aboard .. plz plz help me

Hi

So don't any of the CISs work at present? There should be an overlap between them so that the whole image is scanned.

[mikadonovan]

Did you do this?

[xpert copy]

all 5 cis lamp is not lighting. and there is no sp 4972 code in my mpw 2400...

[mikadonovan]

all 5 cis lamp is not lighting. and there is no sp 4972 code in my mpw 2400...

It may be in SSP. That excerpt is from the manual.

[xpert copy]

It may be in SSP. That excerpt is from the manual.

how to get in ssp mode in mpw 2400

[slimslob]

how to get in ssp mode in mpw 2400

Maybe you shouldn't be attempting to work on any Ricoh equipment if you need to ask that question.

[xpert copy]

Maybe you shouldn't be attempting to work on any Ricoh equipment if you need to ask that question.

yes i am new on this devices

[mikadonovan]

how to get in ssp mode in mpw 2400

Enter sp mode, hold the "#" key and select the system tab.

[Brianneoe]

I would start with putting the old CIS back into the machine and test.