Hello
I have a Mpc2004ex with an blown controller (sc672, tried HDD, Ram etc etc), i'm wondering if the mpc3504 controller fits on a Mpc2004ex
Inviato dal mio SM-G935F utilizzando Tapatalk
Hello
I have a Mpc2004ex with an blown controller (sc672, tried HDD, Ram etc etc), i'm wondering if the mpc3504 controller fits on a Mpc2004ex
Inviato dal mio SM-G935F utilizzando Tapatalk
Last edited by Codex; 07-30-2020 at 07:14 AM.
Memento Audere Semper
Are there no dip switch settings? I remeber long time ago in a B/w machine.. I had to put a dip switch to "1" to fit a controller from another machine (from 25ppm to 35ppm)....i think it didn't work on the newer machines.
Inviato dal mio SM-G935F utilizzando Tapatalk
Memento Audere Semper
Won’t work and make sure you order EX controller.
BCU is the same but not the controller there is a bulletin on the differences between the ex & non ex models.
ex Controller.pdf
Let us eat, drink, and be merry, because tomorrow we may die!
For all your firmware & service manual needs please visit us at:
www.copierfirmware.co.uk - www.printerfirmware.co.uk
Regards Mark
FOR TRADE AND END USER SERVICE CALLS PLEASE VISIT WEB SITE FOR CONTACT DETAILS. COVERING GREATER LONDON {UK} AND ALL SURROUNDING COUNTIES.
RICOH, CANON, KYOCERA, KONICA, SHARP, HP/SAMSUNG BROTHER, LEXMARK.
https://copierservices.simdif.com
Let us eat, drink, and be merry, because tomorrow we may die!
For all your firmware & service manual needs please visit us at:
www.copierfirmware.co.uk - www.printerfirmware.co.uk
Study technical biuletin about it RD239053a
Bookmarks