Page 1 of 3 123 LastLast
Results 1 to 10 of 21
  1. #1
    Technician
    Join Date
    Jun 2015
    Posts
    17
    Rep Power
    11

    Exclamation Ricoh mpc 2800 sc672

    First we had a laser motor error SC202 and the Copier lcd display light just came black,so we fixed the BICU board fuse & replaced the laser motor and now the LCD LIGHT IS ON but after a couple of second the machine displays please wait and stalls on error CODE SC672 is displayed ,keyboar lcd and green light is on but no button is responsive.We have pulled the 1 stick ram out cleaned contacts, all connectors are well harnessed,Cond C174 (OK) , 24 V on R294, %Volts is there too,noticed green led on board always blinking, any suggestion please (Tested power supply looks OK) thank you

  2. #2
    Retired 10,000+ Posts slimslob's Avatar
    Join Date
    May 2013
    Location
    Bakersfield, CA
    Posts
    12,121
    Rep Power
    298

    Re: Ricoh mpc 2800 sc672

    From Goose's Guide:
    Controller to Op Panel comm error - check connection between controller and op panel
    Controller to Op Panel comm error - replace controller board
    Controller to Op Panel comm error - confirm dip SW #1 is in the OFF position
    Controller to Op Panel comm error - update system fw to 1.14.3 or higher & network docbox fw to 1.01 or higher
    You may have damaged the BICU trying to replace the "fuse" or you may have failed to reconnect everything you disconnected. There may have also been additional problems with the BICU before you started.

  3. #3
    Technician
    Join Date
    Jun 2015
    Posts
    17
    Rep Power
    11

    Re: Ricoh mpc 2800 sc672

    Thanks , as soon after it made an error , the sc202 was not visible as the LCD was not lit (was dark), we replaced the fuse on the board Bicu the display lcd light came on and we could read the error, replacing the mirror motor now we are getting SC 652.checked all connectors to controller all seems ok. OLD mirror motor had 2 components burnt.

  4. #4
    Service Manager 2,500+ Posts
    Ricoh mpc 2800  sc672

    sandmanmac's Avatar
    Join Date
    Feb 2009
    Location
    Toronto, ON
    Posts
    3,155
    Rep Power
    107

    Re: Ricoh mpc 2800 sc672

    The dark LCD with SC202 is a well known error on this series and its predecessor, where the Polygon Motor takes out the BICU. Typically, both should be replaced at the same time.
    My guess is that you still have an issue with the BICU .

  5. #5
    Technician
    Join Date
    Jun 2015
    Posts
    17
    Rep Power
    11

    Re: Ricoh mpc 2800 sc672

    thanks,i think i better try to find a used bicu card and start from there, what i find strange is that the machine keypad and lcd keypad do not work only displa, display light and green light on top of switch

  6. #6
    Retired 10,000+ Posts slimslob's Avatar
    Join Date
    May 2013
    Location
    Bakersfield, CA
    Posts
    12,121
    Rep Power
    298

    Re: Ricoh mpc 2800 sc672

    Quote Originally Posted by johncord View Post
    thanks,i think i better try to find a used bicu card and start from there, what i find strange is that the machine keypad and lcd keypad do not work only displa, display light and green light on top of switch
    That is another symptom of a communication error between the controller, BICU, and the control panel. Before spending money, recheck all connections.

  7. #7
    Technician
    Join Date
    Jun 2015
    Posts
    17
    Rep Power
    11

    Re: Ricoh mpc 2800 sc672

    thank you once again, i have checked cables 3 times now all looks in place..

  8. #8
    Copier Technician 500+ Posts
    Ricoh mpc 2800  sc672

    mga's Avatar
    Join Date
    Dec 2010
    Location
    london
    Posts
    686
    Rep Power
    68

    Re: Ricoh mpc 2800 sc672

    Quote Originally Posted by johncord View Post
    Thanks , as soon after it made an error , the sc202 was not visible as the LCD was not lit (was dark), we replaced the fuse on the board Bicu the display lcd light came on and we could read the error, replacing the mirror motor now we are getting SC 652.checked all connectors to controller all seems ok. OLD mirror motor had 2 components burnt.
    What fuse did you replace on the BICU?

  9. #9
    Technician
    Join Date
    Jun 2015
    Posts
    17
    Rep Power
    11

    Re: Ricoh mpc 2800 sc672

    It is a protective link R294 ,the lcd display lit up replacing this component , all other cap seems ok, what is your point any suggestion .the 24v and 5v are there.
    really appreciate, trying to find some boards online for a fair price.

  10. #10
    Service Manager 5,000+ Posts
    Ricoh mpc 2800  sc672

    Phil B.'s Avatar
    Join Date
    Jul 2016
    Location
    Raleigh NC
    Posts
    9,553
    Rep Power
    221

    Re: Ricoh mpc 2800 sc672

    Quote Originally Posted by johncord View Post
    thank you once again, i have checked cables 3 times now all looks in place..

    LOOKS?

    did you disconnect the re-connect just because something LOOKS connected doesn't mean they ARE connected properly.. you COULD have a bent pin in the connector

    pull the damn harnesses and reconnect

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here