Lanier LD645C

[stevee104]

Customer email these pictures of the transfer unit, i have no manuals for this machine
because we are a Kyocera dealer and they have 3 km on site. What are we looking at replacing here
and is the parts still available. I did some searching and all i can come up with is a transfer guide
plate assembly.

[anothertech]

That's the same as a Ricoh MP C4501/MP C5501

Here's the tech pub that shows you what to order, I have no idea if these parts are still available.

Transfer Roller Case.pdf

[slimslob]

If you compare you photos with the illustrations in anothertech's reply in the area where the the metal plate is on the now style case you will see where the plastic has broken. Ricoh still used the same or similar in the C4502 so should still be available.

[TonerMunkeh]

D0894551, just replace the lot.

[davel]

D0894551, just replace the lot.

May also need Guides front and rear D0296318,D0296319, also stopper D0296316.

[stevee104]

Thanks guys for quick response , i think i am going to replaced the whole thing if i
can get it, unless you guys have a used one you want to sell.

[TonerMunkeh]

Thanks guys for quick response , i think i am going to replaced the whole thing if i
can get it, unless you guys have a used one you want to sell.

Found a couple on ebay:

https://www.ebay.co.uk/sch/i.html?_f...94551&_sacat=0

[skinnyb]

D0894551, just replace the lot.

This. I replace the whole assembly. It has all you need with the exception of ... D0296316, D0296318, D0296319. Order them all and replace them all, and if it's real bad and ripped the belt get a belt too D1446091 and the cleaning unit D0896022

Sent from my LM-V405 using Tapatalk

[stevee104]

Thank you will get them ordered next week ,
taking a long weekend off.

[fshead]

i would pull the whole right door assembly off and shake it out as you will have a lot of small plastic that could cause damage or jamming once all is
put back together..