Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 3 of 3
  1. #1
    Technician
    Join Date
    Oct 2019
    Location
    Germany
    Posts
    25
    Rep Power
    10

    Question SP 2-103-1 on Ricoh C3003

    Hello together,

    can someone tell me what SP 2-103-1 on a Ricoh C3003 does? It's 4,2 by default but is set to 2,0.
    I don't really understand the explanation in the manual for this option.

    Thanks a lot.

    Best regards,
    Trommel

    EDIT: Sorry I didn't mention the name of the option but I don't know the exact translation either... Thanks for understanding!!!

  2. #2
    Senior Tech 250+ Posts DRichard's Avatar
    Join Date
    May 2008
    Location
    Knoxville, TN
    Posts
    482
    Rep Power
    43

    Re: Question SP 2-103-1 on Ricoh C3003

    Quote Originally Posted by Trommel View Post
    Hello together,

    can someone tell me what SP 2-103-1 on a Ricoh C3003 does? It's 4,2 by default but is set to 2,0.
    I don't really understand the explanation in the manual for this option.

    Thanks a lot.

    Best regards,
    Trommel

    EDIT: Sorry I didn't mention the name of the option but I don't know the exact translation either... Thanks for understanding!!!
    2103 [Erase Margin Adjustment]
    001
    Lead Edge Width *ENG [0.0 to 9.9 / 4.2 / 0.1mm/step]
    Adjusts trimming for sub scan lead edge.
    § Value increase: Trim wider.
    § Value decrease: Trim narrower.

  3. #3
    Retired 10,000+ Posts
    Question SP 2-103-1 on Ricoh C3003

    slimslob's Avatar
    Join Date
    May 2013
    Location
    Bakersfield, CA
    Posts
    34,126
    Rep Power
    989

    Re: Question SP 2-103-1 on Ricoh C3003

    Quote Originally Posted by Trommel View Post
    Hello together,

    can someone tell me what SP 2-103-1 on a Ricoh C3003 does? It's 4,2 by default but is set to 2,0.
    I don't really understand the explanation in the manual for this option.

    Thanks a lot.

    Best regards,
    Trommel
    Most likely the customer has originals that have vary narrow margins and had to change it to prevent losing needed information. It can also increase the chance of lead edge fusing jams.

    EDIT: Sorry I didn't mention the name of the option but I don't know the exact translation either... Thanks for understanding!!!
    You could have used a website such as translate.google.com.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here