Page 1 of 2 12 LastLast
Results 1 to 10 of 17
  1. #1
    Senior Tech 100+ Posts
    Join Date
    Jul 2011
    Location
    SAN SALVO
    Posts
    175
    Rep Power
    0

    Firmware language display RICOH MP C4503/C5503

    hello to all I bought used copiers Ricoh mp c4503 / c5503 I need to change the language on the display (Italian language is required) can someone help me? thank you

  2. #2
    Retired 10,000+ Posts slimslob's Avatar
    Join Date
    May 2013
    Location
    Bakersfield, CA
    Posts
    12,327
    Rep Power
    305

    Re: Firmware language display RICOH MP C4503/C5503

    Depends on whether you have a normal operation panel or a Smart Operation Panel:
    Normal operation panel

    1. Press the [User Tools/Counter] key.
    2. Press language key until the language you want to display appears.

    SOP

    1. Press the [Home] key on the top left of the control panel. Flick the screen to the left, and then press the [User Tools] icon () on the Home screen 4.
    2. Press language key until the language you want to display appears.


    Unlike older models that only loaded 2 languages and required reload the language to be able to change 1 or both of them, on the 03s all available languages are loaded by the factory. If the exact language you want does not appear, it is not available.

  3. #3
    Senior Tech 100+ Posts
    Join Date
    Jul 2011
    Location
    SAN SALVO
    Posts
    175
    Rep Power
    0

    Re: Firmware language display RICOH MP C4503/C5503

    have check the language but italian language is not loaded if the language is not loaded what should I do to have the Italian language? i must load the new firmware? thanks

  4. #4
    Retired 10,000+ Posts slimslob's Avatar
    Join Date
    May 2013
    Location
    Bakersfield, CA
    Posts
    12,327
    Rep Power
    305

    Re: Firmware language display RICOH MP C4503/C5503

    If you scrolled through all the languages then as far as I know if a language is not preloaded at the factory on those models, the only solution is to contact Ricoh-EU. You may even have to pay to have a custom language firmware created.

  5. #5
    Senior Tech 100+ Posts
    Join Date
    Jul 2011
    Location
    SAN SALVO
    Posts
    175
    Rep Power
    0

    Re: Firmware language display RICOH MP C4503/C5503

    thanks slimslob I wanted to tell you that I have two of these photocopiers on the other the Italian language is there and I solved it immediately ... is it possible somehow to use the firmware of this second photocopier and install it on the one that does not have the Italian language?

  6. #6
    Senior Tech 100+ Posts
    Join Date
    Jul 2011
    Location
    SAN SALVO
    Posts
    175
    Rep Power
    0

    Re: Firmware language display RICOH MP C4503/C5503

    this is the firmware language "0" and "1" D1491490Q, for both copiers the same firmware but while one has 5 languages ​​preloaded (including Italian) the second only 2 (English and French)

  7. #7
    Retired 10,000+ Posts slimslob's Avatar
    Join Date
    May 2013
    Location
    Bakersfield, CA
    Posts
    12,327
    Rep Power
    305

    Re: Firmware language display RICOH MP C4503/C5503

    The only thing that I can think of is that one of them is from the first production run, before they started loading all 5 languages. Reflashing both language firmware entries might correct it. If not it will allow you to select the 2 languages you wish to have available to the user. One thing you might check is if the part number on both BICU boards are the same. The number stamped on the board that has the production letter not the one for the bare board.

  8. #8
    Senior Tech 250+ Posts
    Firmware language display RICOH MP C4503/C5503

    GIUBOSS's Avatar
    Join Date
    Jul 2013
    Location
    Roma
    Posts
    447
    Rep Power
    28

    Re: Firmware language display RICOH MP C4503/C5503

    Quote Originally Posted by tecnomarco View Post
    this is the firmware language "0" and "1" D1491490Q, for both copiers the same firmware but while one has 5 languages ​​preloaded (including Italian) the second only 2 (English and French)
    try to change the switches in setting sp 5-009 to display the desired language (if preloaded in the machine)

  9. #9
    Retired 10,000+ Posts slimslob's Avatar
    Join Date
    May 2013
    Location
    Bakersfield, CA
    Posts
    12,327
    Rep Power
    305

    Re: Firmware language display RICOH MP C4503/C5503

    Quote Originally Posted by GIUBOSS View Post
    try to change the switches in setting sp 5-009 to display the desired language (if preloaded in the machine)
    I didn't know about that SP setting. He might want to compare setting between the 2 machines and change the one that has 2 languages to match the one that has 5.

  10. #10
    Senior Tech 100+ Posts
    Join Date
    Jul 2011
    Location
    SAN SALVO
    Posts
    175
    Rep Power
    0

    Re: Firmware language display RICOH MP C4503/C5503

    Quote Originally Posted by slimslob View Post
    I didn't know about that SP setting. He might want to compare setting between the 2 machines and change the one that has 2 languages to match the one that has 5.
    Thank's GIUBOSS my problem is the language is not preloaded....I would need a firmware D1491490Q which contains the Italian language

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here