Pro 8100s and 8200s any good?

[JaysOnTheEDGE]

Do the TCRU units have a part number?
On the 1107 I found about 6 whole fuser on ebay so I just keep them rebuilt and my customer swaps them when lines appear on roller.
All the other units I just rebuild at their place as needed.

Ricoh Online Configurator

look under maintence and other accessories it gives the EDP codes for them

Service Part number is D179-4017 for the 8100 Fuser, D270-4017 for the 8200 Fuser

The cleaning units, charger, Drum, and Developer are interchangeable between the 2 series

If you can't find any TCRU kits you could just order the Assemblies, that's basically what's in the TCRU box you get 1 each of the cleaning units 1 drum, 1 bottle of developer, 1 drum holder, the purple screwdriver, a bag of dusting powder and some extra screws

[slimslob]

Do the TCRU units have a part number?
On the 1107 I found about 6 whole fuser on ebay so I just keep them rebuilt and my customer swaps them when lines appear on roller.
All the other units I just rebuild at their place as needed.

TCRU kit for the Pro 1107 TCRU Type 1107 EDP Code 404271
SP 5-185 must be set to “1: ON” to enable TCRU Mode