Mp c4502 wait warming up..

[MIGUELMARCHENA]

Last month, I asked for help for this same machine, because the power supply was damaged ... well, it was changed and it was solved.

thank you very much again.

Now, he has returned to disturb the current in the village, and presented sc 672 ..

Remove the disk and you can start the machine, but
It stays in wait warming up,

Firmware update.
It didn't work

I removed the memory to have if the problem remained there, but neither.

I reconnected all the connectors, nothing.

So I copied the nvram and proceeded to do 5801 all,

..on startup, it shows that the imaging units are not installed but no longer displays "wait, warming up"

Any suggestion will be very welcome.

Greetings

Enviado desde mi H3321 mediante Tapatalk

[davel]

You have a brick.

[Notrons]

You have a brick.

Or a parts machine.

[Phil B.]

Last month, I asked for help for this same machine, because the power supply was damaged ... well, it was changed and it was solved.

thank you very much again.

Now, he has returned to disturb the current in the village, and presented sc 672 ..

Remove the disk and you can start the machine, but
It stays in wait warming up,

Firmware update.
It didn't work

I removed the memory to have if the problem remained there, but neither.

I reconnected all the connectors, nothing.

So I copied the nvram and proceeded to do 5801 all,

..on startup, it shows that the imaging units are not installed but no longer displays "wait, warming up"

Any suggestion will be very welcome.

Greetings

Enviado desde mi H3321 mediante Tapatalk

after the 5801.. did you input the values from the birth cert?

[MIGUELMARCHENA]

after the 5801.. did you input the values from the birth cert?

Hi good day

Thank you very much for answering .

Yes, I have entered the values.

But on the normal screen, it appears that the imaging units are not installed correctly.

But they are, and they work fine. They are new

When reloading the nvram

The units installed correctly appear, but the message that you expect to warm up remains

Thank you very much for your help


Enviado desde mi H3321 mediante Tapatalk

[mga]

Hi good day

Thank you very much for answering .

Yes, I have entered the values.

But on the normal screen, it appears that the imaging units are not installed correctly.

But they are, and they work fine. They are new

When reloading the nvram

The units installed correctly appear, but the message that you expect to warm up remains

Thank you very much for your help


Enviado desde mi H3321 mediante Tapatalk

OK the image not installed correctly is usually down to cheap toner installed or damaged toner pwb
Copying nvram then reloading doesn't really do the job as just putting same values back on machine you needed to do a full smc report then adding default values on sheet with are different to the current values installed as Phil b said its the birth certificate.

[MIGUELMARCHENA]

OK the image not installed correctly is usually down to cheap toner installed or damaged toner pwb
Copying nvram then reloading doesn't really do the job as just putting same values back on machine you needed to do a full smc report then adding default values on sheet with are different to the current values installed as Phil b said its the birth certificate.

thanks for answering .

Yes, I know, and they were installed,

Cheers

[Phil B.]

Hi good day

Thank you very much for answering .

Yes, I have entered the values.

But on the normal screen, it appears that the imaging units are not installed correctly.

But they are, and they work fine. They are new

When reloading the nvram

The units installed correctly appear, but the message that you expect to warm up remains

Thank you very much for your help


Enviado desde mi H3321 mediante Tapatalk

warm up means there is a suspected problem with the fuser.

I'm done here.. I don't think he is doing things properly.. just causing himself and us an undue amount of typing suggestions. Looking at his profile, I feel he wasn't trained on anything. BYE!

[mga]

warm up means there is a suspected problem with the fuser.

I'm done here.. I don't think he is doing things properly.. just causing himself and us an undue amount of typing suggestions. Looking at his profile, I feel he wasn't trained on anything. BYE!

Stay safe Phil take care.

[mikadonovan]

Last month, I asked for help for this same machine, because the power supply was damaged ... well, it was changed and it was solved.

thank you very much again.

Now, he has returned to disturb the current in the village, and presented sc 672 ..

Remove the disk and you can start the machine, but
It stays in wait warming up,

Firmware update.
It didn't work

I removed the memory to have if the problem remained there, but neither.

I reconnected all the connectors, nothing.

So I copied the nvram and proceeded to do 5801 all,

..on startup, it shows that the imaging units are not installed but no longer displays "wait, warming up"

Any suggestion will be very welcome.

Greetings

Enviado desde mi H3321 mediante Tapatalk

Maybe the BRB PCB..
C5502 "photconductor units not set"