Have you tried from your laptop or another computer? might be worth a try.
Have you tried from your laptop or another computer? might be worth a try.
I'm just sharing where I had a C3503 do the same thing, WIM blocked and would NOT connect.
I executed SP 5801-10, 20, 25 This has worked twice for me.
Also try...
Check SP 5828-091 =1
Also, In user tools System / Interface settings / Permit SSL/TLS communication is set to cypher text /Clear Text.... Then reboot
Good luck
Regards Mark
FOR TRADE AND END USER SERVICE CALLS PLEASE VISIT WEB SITE FOR CONTACT DETAILS. COVERING GREATER LONDON {UK} AND ALL SURROUNDING COUNTIES.
RICOH, CANON, KYOCERA, KONICA, SHARP, HP/SAMSUNG BROTHER, LEXMARK.
https://copierservices.simdif.com
+1 on this. Whenever we know the customer is going to be using Macs, we ALWAYS recommend they purchase the optional PostScript and not rely on the emulation version. We occasionally have to follow up with them afterwards if they wouldn't go with it at the outset and found the emulation to be too little or if they later added Mac users to their staff.
I had a machine that would not load WIM and it was the antivirus software. Turned it off and it worked fine.
Bookmarks