Dislikes:
0
-
Technician
- Rep Power
- 0
Mp 2501 sc144-00 and photoconductor unit not set properly
Hi. I've got a ricoh mp2501 throwing all sorts of issues at me. Stating photoconductor unit not set properly, at the same time as an sc144-00 and sc 992-00 error. I've seen a thread on here from 5 years ago that had the exact issue, but I don't understand his fix. All connectors look good. I was going to order BICU board, but now I doubt that, as the old post said he had fitted that and it didn't change. Any ideas really appreciated.
Thanks in advance
-
Re: Mp 2501 sc144-00 and photoconductor unit not set properly
Check if the pcdu was assembled correctly with the unique parts of an mp2501.
Check the housing at the rear side in the machine where the connector of the pcdu makes contact.
-
Technical Manager
- Rep Power
- 18
Re: Mp 2501 sc144-00 and photoconductor unit not set properly
Also check the ribbon cable connected between BICU & SBU. It can be easily damaged than other cables.
-
Re: Mp 2501 sc144-00 and photoconductor unit not set properly
Have you dissasebly and reassebly it ? If yes you havent placed correct mag roller or drum.
Else at the back of PCR there is a jacket similar to ethernet perhaps it is not straight or at it's possition.
Also is at the back side of CRU the plastic firmly set on CRU?
Asume youhave checked for obstacles
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks