Hi guys!
Just solved this one.
If you get J102 on SR5000 when you are NOT punching, check if the mylars inside the Punch Unit are torn.
Hope this helps anyone.
received_2330087823803345.jpg
Hi guys!
Just solved this one.
If you get J102 on SR5000 when you are NOT punching, check if the mylars inside the Punch Unit are torn.
Hope this helps anyone.
received_2330087823803345.jpg
None of my customers use hole punch so not sure if their needed but we just remove them and leave off with no issues.
This also happens on the SR5050/ SR5060 finisher on the Pro 8100,8200, C7100, and C9100 the mylars get warped and chewed up and causing jamming, just take the punch unit out and remove them have had no issues doing this yet.
I'm assuming you don't do what I've done
yes, sorry remove mylars and re-install the punch unit, while you have it out good time to clean and LIGHTLY lubricate the punch dies
Bookmarks