Hi MPC 4503 Print out have dirty dot dot at center, Pls Help
*already change c m y k drum and heater unit
Hi MPC 4503 Print out have dirty dot dot at center, Pls Help
*already change c m y k drum and heater unit
What are the print and PM counts? If you already replaced the drum I'm leaning towards the Fuser sleeve or possibly ITB
Sent from my WAS-LX1 using Tapatalk
Let us eat, drink, and be merry, because tomorrow we may die!
For all your firmware & service manual needs please visit us at:
www.copierfirmware.co.uk - www.printerfirmware.co.uk
Regards Mark
FOR TRADE AND END USER SERVICE CALLS PLEASE VISIT WEB SITE FOR CONTACT DETAILS. COVERING GREATER LONDON {UK} AND ALL SURROUNDING COUNTIES.
RICOH, CANON, KYOCERA, KONICA, SHARP, HP/SAMSUNG BROTHER, LEXMARK.
https://copierservices.simdif.com
Could also be the ITB cleaning unit past PM count.
If paper is Short Edge Feed it could be a dirty transport roller.
Regards Mark
FOR TRADE AND END USER SERVICE CALLS PLEASE VISIT WEB SITE FOR CONTACT DETAILS. COVERING GREATER LONDON {UK} AND ALL SURROUNDING COUNTIES.
RICOH, CANON, KYOCERA, KONICA, SHARP, HP/SAMSUNG BROTHER, LEXMARK.
https://copierservices.simdif.com
Bookmarks