Thanks: 
Likes: Hi everyone,
Does any one has the idea what would be the cause of paper jam on fuser unit??
Attached is picture.
Dislikes: 0
Hi everyone,
Does any one has the idea what would be the cause of paper jam on fuser unit??
Attached is picture.
Some more info please? Picture not too clear on my mobile with a broken screen lol. What model is it? Total counters? PM counters?
It looks like a MPC 3002 or similar, My money is on the sleeve being dried out if it is
Sent from my WAS-LX1 using Tapatalk
Jam code?
Does it make a grinding noise?
Have had many of these where the Pressure Roller gear or the Idler gear deteriorates, and can cause jamming in the fuser.
Do you have Correct size/orientation settings in paper tray?
What's the jam code?
Omertà
This all day. Any strange noises? Does the paper make it to the other side of the Fuser? Wrinkled edges? Not enough into to help you. I would venture a guess that unit needs rebuilt (new sleeve and pressure roller).Originally Posted by FrohnB
Sent from my LM-V405 using Tapatalk
I guess you are an end user?
What is the PM life of the sleeve?
Let us eat, drink, and be merry, because tomorrow we may die!
For all your firmware & service manual needs please visit us at:
www.copierfirmware.co.uk - www.printerfirmware.co.uk
It makes grinding noise. No code, trying to do color pattern.
Paper size correct, grinding noise.
The sleeve is almost new and grinding noise when rotating. Pressure roller seems good.
How do the fuser gears look?
Reply With Quote
Bookmarks