Automatic firmware update

[mikadonovan]

Hey, All. No questions today, just the result of the auto firmware update on a c6003(all new for me) First off, as an independent, I kinda thought we would have to have @remote or something for this to work. Damn the torpedoes, full speed ahead. I entered service mode and clicked the "update firmware" tab, and then...the downloading firmware indication came up, and it stayed like that FOREVER (I thought it might have bricked the controller). After 30 or 40 minutes it started installing the modules, and completed with a restart. Checking the firmware versions from the logging data I seen it did indeed update firmware. Life is good, and it's cool, but onsite updates will need to be done with a SD card for much quicker results. I can see possible malfunctions occurring by setting the machine to do this on it's own resulting in a service call at the worst possible time, so I think I will leave that off. Everyone have a great day and stay safe.

[anothertech]

I wonder how it updated if it didn't have @remote setup on it?

[slimslob]

I wonder how it updated if it didn't have @remote setup on it?

Maybe the original selling dealer/branch had setup @Remote. Would need to look at the values in SP 201-208 to know for sure.

[anothertech]

Maybe the original selling dealer/branch had setup @Remote. Would need to look at the values in SP 201-208 to know for sure.

Yeah, I hadn't thought that maybe it was from the previous owner. He could look at SP5816-201, if it's a 2 then it's running @remote embedded.

[slimslob]

Yeah, I hadn't thought that maybe it was from the previous owner. He could look at SP5816-201, if it's a 2 then it's running @remote embedded.

I left out the 5816.

[copier tech]

Hey, All. No questions today, just the result of the auto firmware update on a c6003(all new for me) First off, as an independent, I kinda thought we would have to have @remote or something for this to work. Damn the torpedoes, full speed ahead. I entered service mode and clicked the "update firmware" tab, and then...the downloading firmware indication came up, and it stayed like that FOREVER (I thought it might have bricked the controller). After 30 or 40 minutes it started installing the modules, and completed with a restart. Checking the firmware versions from the logging data I seen it did indeed update firmware. Life is good, and it's cool, but onsite updates will need to be done with a SD card for much quicker results. I can see possible malfunctions occurring by setting the machine to do this on it's own resulting in a service call at the worst possible time, so I think I will leave that off. Everyone have a great day and stay safe.

On the C6003 auto fw update will only work if @remote is installed, this machine will have had it installed.

On the IMC range you can set the fw to update at a date & time of your choice this works out of the box just need to set a couple of SPs.

[mikadonovan]

Yeah, I hadn't thought that maybe it was from the previous owner. He could look at SP5816-201, if it's a 2 then it's running @remote embedded.

SP 5816-201 is set to "1".
Here is the before and after on the logging data..
SP 5816-001 is set to "2" (NRS remote service ON)

[techsolink]

SP 5816-201 is set to "1".
Here is the before and after on the logging data..
SP 5816-001 is set to "2" (NRS remote service ON)

Hello Dear!!!!

Pls can We Have the activation mode of the @Remote
How to make definitely the c6003 firmware up to date ????

And where to find the files if we cannot have acces to the @Remote
Thanks For your attention

[mikadonovan]

Hello Dear!!!!

Pls can We Have the activation mode of the @Remote
How to make definitely the c6003 firmware up to date ????

And where to find the files if we cannot have acces to the @Remote
Thanks For your attention

Why are you asking me? I know absolutely dick about @remote except for the fact it exists.

[techsolink]

Why are you asking me? I know absolutely dick about @remote except for the fact it exists.

Wow okay ! thanks !!

But what about the firmware update procedure ?

I tried way actions but any of them worked for me that's Why I was wondering of how to make the firmware up to date?