Can anyone help with a MP C307 that has a blank screen with only the blue power light on in the top right of the control panel ? The fuser warms up but the machine won't print, copy or scan. Any suggestions.
Can anyone help with a MP C307 that has a blank screen with only the blue power light on in the top right of the control panel ? The fuser warms up but the machine won't print, copy or scan. Any suggestions.
I'd try accessing Web Image Monitor to look for any alerts or error codes, but I suspect it's a faulty controller
Sent from my WAS-LX1 using Tapatalk
Could also be the ops panel main board.
I agree with TonerMunkeh.
Usually it's the Op Panel that has crapped out. We normally send ours into Hytec for repair as this is cheaper than buying a new one.
If you have a good donor machine, I would try swapping the op panel to see if that is indeed what it is, and if that doesn't solve it, then you may be looking at a controller.
Omertà
Regards Mark
FOR TRADE AND END USER SERVICE CALLS PLEASE VISIT WEB SITE FOR CONTACT DETAILS. COVERING GREATER LONDON {UK} AND ALL SURROUNDING COUNTIES.
RICOH, CANON, KYOCERA, KONICA, SHARP, HP/SAMSUNG BROTHER, LEXMARK.
https://copierservices.simdif.com
Here you go
Regards Mark
FOR TRADE AND END USER SERVICE CALLS PLEASE VISIT WEB SITE FOR CONTACT DETAILS. COVERING GREATER LONDON {UK} AND ALL SURROUNDING COUNTIES.
RICOH, CANON, KYOCERA, KONICA, SHARP, HP/SAMSUNG BROTHER, LEXMARK.
https://copierservices.simdif.com
Thanks for the info given so far. I will be returning to the machine later this week and will use the info given for further investigations. Thanks again.
Swapped Op Panel from donar machine, all working again. Many thanks !
Let us eat, drink, and be merry, because tomorrow we may die!
For all your firmware & service manual needs please visit us at:
www.copierfirmware.co.uk - www.printerfirmware.co.uk
Bookmarks