MPC306 Touch panel calibration

[copier tech]

Here is a very handy tip for recalibrating a touch screen when you are struggling to press the buttons as the calibration is so bad. Plug a USB mouse into the USB slot on the op panel, use the mouse the press all the buttons.
Now we ourselves have been in dispute with a customer for wrecking the touch screens on 3 different machines from the way they have been badly cleaning them, even after I told them to stop doing it and offered 2 alternatives.
Had to actually order in some touch screen parts... also some of these parts are not on the parts manuals I had to go to Ricoh level 2 to find out, funny that the £85 part is left out but the £500 - £1500 are all on the manual

Thanks for the info. Here's a breakdown of the SOP.

Item 3 should be all you need unless they have really drenched it! D1961503

Smart_Operation_Panel.pdf

[JayPaul]

Is that pdf for the mpc 306?
my touch screen troubles so far were on mpc 4504 and imc 4500.
on tdc, one of them didn’t even have the touch screen part. It’s cool though I have it now.
Cheers

[copier tech]

Is that pdf for the mpc 306?
my touch screen troubles so far were on mpc 4504 and imc 4500.
on tdc, one of them didn’t even have the touch screen part. It’s cool though I have it now.
Cheers

Yes this is from the TDC on the MP C306.

[mga]

The touch screen will away be available if not in parts manual check for lasted on my ricoh don't forget tdc2 only gets updated with new patch and the latest manual may not be on there

[mga]

Mpc2004 to 6004 smart panel parts from tdc not in machine parts has its own manual