Page 1 of 3 123 LastLast
Results 1 to 10 of 28

Thread: Mpc 5501 sc204

  1. #1
    Service Manager 1,000+ Posts
    Mpc 5501 sc204

    mrfuser's Avatar
    Join Date
    May 2007
    Posts
    1,557
    Rep Power
    51

    Mpc 5501 sc204

    Client broke transfer roller section and we replaced it from a donor machine. All seems fine except giving us an sc204 with the roller installed. Without roller it’s fine but jams. Any ideas?

  2. #2
    Retired 10,000+ Posts
    Mpc 5501 sc204

    slimslob's Avatar
    Join Date
    May 2013
    Location
    Bakersfield, CA
    Posts
    34,126
    Rep Power
    989

    Re: Mpc 5501 sc204

    Are you absolutely sure that the error code is SC204 or is that a typo? To my knowledge there s absolutely no relation between the PTR assembly and the polygon mirror motor.

  3. #3
    Service Manager 2,500+ Posts
    Mpc 5501 sc204

    sandmanmac's Avatar
    Join Date
    Feb 2009
    Location
    Toronto, ON
    Posts
    3,885
    Rep Power
    159

    Re: Mpc 5501 sc204

    Quote Originally Posted by mrfuser View Post
    Client broke transfer roller section and we replaced it from a donor machine. All seems fine except giving us an sc204 with the roller installed. Without roller it’s fine but jams. Any ideas?
    First....how is it that you say 'all seems fine' when the machine doesn't work at all
    Second, I completely agree with Tim. SC204 is a polygon error. I don't see any connection between the 2 areas

  4. #4
    Service Manager 1,000+ Posts
    Mpc 5501 sc204

    mrfuser's Avatar
    Join Date
    May 2007
    Posts
    1,557
    Rep Power
    51

    Re: Mpc 5501 sc204

    There was a bulletin forever ago about the lower springs causing this. If you take the ptr out no error. So would we still not get a polygon error if the ptr were removed?

  5. #5
    Retired 10,000+ Posts
    Mpc 5501 sc204

    slimslob's Avatar
    Join Date
    May 2013
    Location
    Bakersfield, CA
    Posts
    34,126
    Rep Power
    989

    Re: Mpc 5501 sc204

    Then why are you not doing what that supposed bulletin says to do to correct the problem.?

  6. #6
    Service Manager 1,000+ Posts
    Mpc 5501 sc204

    mrfuser's Avatar
    Join Date
    May 2007
    Posts
    1,557
    Rep Power
    51

    Re: Mpc 5501 sc204

    Thanks. Yes I have and just was having a hard time lining up those springs. I did and it works and so yes an sc204 does have to do with ptr

  7. #7
    Retired 10,000+ Posts
    Mpc 5501 sc204

    slimslob's Avatar
    Join Date
    May 2013
    Location
    Bakersfield, CA
    Posts
    34,126
    Rep Power
    989

    Re: Mpc 5501 sc204

    Quote Originally Posted by mrfuser View Post
    Thanks. Yes I have and just was having a hard time lining up those springs. I did and it works and so yes an sc204 does have to do with ptr
    Can you provide the bulletin?

  8. #8
    Service Manager 1,000+ Posts
    Mpc 5501 sc204

    mrfuser's Avatar
    Join Date
    May 2007
    Posts
    1,557
    Rep Power
    51

    Re: Mpc 5501 sc204

    I wish. It’s been years and years and I only had the memory of it in my upstairs rattle cabinet. Getting too old for these things

  9. #9
    Service Manager 10,000+ Posts
    Mpc 5501 sc204

    Phil B.'s Avatar
    Join Date
    Jul 2016
    Location
    Raleigh NC
    Posts
    22,656
    Rep Power
    658

    Re: Mpc 5501 sc204

    Quote Originally Posted by mrfuser View Post
    I wish. It’s been years and years and I only had the memory of it in my upstairs rattle cabinet. Getting too old for these things

    so if your brain is that feeble how can you rely on it to pull the proper information out of the depths?

    We see all these posts from you when the info is CLEARLY (most times) in the manual. Are you that afraid to look it up in the manual?

  10. #10
    Service Manager 1,000+ Posts
    Mpc 5501 sc204

    mrfuser's Avatar
    Join Date
    May 2007
    Posts
    1,557
    Rep Power
    51

    Re: Mpc 5501 sc204

    Thanks for that worthless garbage. Enjoy your insulting posts. I am in a remote area and most of the time I would have to travel 70 or more miles to grab the pdf. Some decent folks on here help quicker than I could drive to get them. If you don’t want to help, don’t, just go about your miserable existence and be happy.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here