Page 2 of 2 FirstFirst 12
Results 11 to 19 of 19
  1. #11
    Service Manager 2,500+ Posts
    ricoh 1022 white stripes

    sandmanmac's Avatar
    Join Date
    Feb 2009
    Location
    Toronto, ON
    Posts
    3,223
    Rep Power
    112

    Re: ricoh 1022 white stripes

    Quote Originally Posted by slimslob View Post
    Most Type 1027 CPU if you can find them are rebuilt, even from Ricoh who labels them as Type 1027R.
    Even though you can't get the original from Ricoh, Precision roller still carries them (although I don't order from them here in Canada), I get my originals from NuTone Densi.
    I can't explain how/why that's the case, but it is

  2. #12
    Retired 10,000+ Posts slimslob's Avatar
    Join Date
    May 2013
    Location
    Bakersfield, CA
    Posts
    13,310
    Rep Power
    340

    Re: ricoh 1022 white stripes

    Quote Originally Posted by sandmanmac View Post
    Even though you can't get the original from Ricoh, Precision roller still carries them (although I don't order from them here in Canada), I get my originals from NuTone Densi.
    I can't explain how/why that's the case, but it is
    I think Precission Roller is where we used to get rebuild kits from. Did not include the developer but the instruction sheet gave you the Ricoh developer to use and provided a bottle to measure the proper amount. If I remember two bags of developer did three PCU. My boss tried some from another source one time, lower cost ha ha. The blades were too soft and failed in less than 2 weeks.

  3. #13
    Junior Member
    Join Date
    Feb 2020
    Location
    bsas
    Posts
    5
    Rep Power
    0

    Re: ricoh 1022 white stripes

    ok thanks for the inputs ,i wish i had a tech nearby, but where i live(small town) i have to manage to fix the unit on my own . i'll check for a pcu but all the ones i could find at the moment costs more or less 100u$s , and comparing that price from precisionrolling site at 240 i dont think are very trusty .

  4. #14
    Retired 10,000+ Posts slimslob's Avatar
    Join Date
    May 2013
    Location
    Bakersfield, CA
    Posts
    13,310
    Rep Power
    340

    Re: ricoh 1022 white stripes

    Quote Originally Posted by manitos View Post
    ok thanks for the inputs ,i wish i had a tech nearby, but where i live(small town) i have to manage to fix the unit on my own . i'll check for a pcu but all the ones i could find at the moment costs more or less 100u$s , and comparing that price from precisionrolling site at 240 i dont think are very trusty .
    Do you at least have a service manual? If not Private Message me with your email address.

  5. #15
    Junior Member
    Join Date
    Feb 2020
    Location
    bsas
    Posts
    5
    Rep Power
    0

    Re: ricoh 1022 white stripes

    Quote Originally Posted by slimslob View Post
    Do you at least have a service manual? If not Private Message me with your email address.
    yes i have it , it says "Model R-C2a/b(Machine Code: B022/B027)SERVICE MANUAL" , thanks!

  6. #16
    Technician
    Join Date
    Oct 2019
    Location
    Kzn
    Posts
    36
    Rep Power
    3

    Re: ricoh 1022 white stripes

    I think the guys have given you the best possible causes.

    Check your optics. Mirrors. Motor drive, cables/belts and scanner rails. Also those copies you made, you didn't say if you place the original directly on the platen glass or in the ADF. If it was fed in the ADF check your feed. Make sure it feeding smoothly.

    Also

    I would say try a good PCU or if you can rebuild 1. Be sure to put in OEM PARTS. Drum, Dev, blade. Check your charge roller and development drive gears. Replace if necessary.

    I hope this helps

  7. #17
    Junior Member
    Join Date
    Feb 2020
    Location
    bsas
    Posts
    5
    Rep Power
    0

    Re: ricoh 1022 white stripes

    Quote Originally Posted by KeviM View Post
    I think the guys have given you the best possible causes.

    Check your optics. Mirrors. Motor drive, cables/belts and scanner rails. Also those copies you made, you didn't say if you place the original directly on the platen glass or in the ADF. If it was fed in the ADF check your feed. Make sure it feeding smoothly.

    Also

    I would say try a good PCU or if you can rebuild 1. Be sure to put in OEM PARTS. Drum, Dev, blade. Check your charge roller and development drive gears. Replace if necessary.

    I hope this helps
    hi , adf or glass have same problem . i will check those too, thanks for suggestions ,i will see what i can find.

  8. #18
    Service Manager 1,000+ Posts
    Join Date
    Jun 2012
    Location
    Turnhout
    Posts
    1,268
    Rep Power
    35

    Re: ricoh 1022 white stripes

    don't put new wine in old barrels

  9. #19
    Technician
    Join Date
    Oct 2019
    Location
    Kzn
    Posts
    36
    Rep Power
    3

    Re: ricoh 1022 white stripes

    Also.... I know this is a long shot but hows your laser unit...

    Plus check your main charge roller. Make sure it is rolling properly and is clean properly.

    Hope this helps.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here