airprint c3003

[copier tech]

Thanks, Gift.
Is this certificate originally for free or not?
And has the imc2000 also such a certificate, or is it for this model already been signed?
Perhaps there is a Ricoh bulletin concerning this matter?

I'm posting a lot of questions, i know. But you must know that with a Brother these are no issues at all;
it installs itself automatically...

To rewrite the certificate try running SP5870-003 then 001 and reboot the device, this should then allow you to use Airprint, if still no luck then try the update certificate method see attached pdf.

C1 METIS AirPrint.pdf

[slimslob]

I think this QR code feature for the app was introduced with the MPC3004 series. This app also has nothing to do with airprint, that's a native feature for apple mobile devices.

This is correct, the QR code is an app for models with the smart operation panel.

The SOP is available for the Cxx03 models as an option.

[mga]

Hoi,
We have Airprint active in WIM, but it is not working.
We presume that the Airprint signals go via the wireless router and not via the c3003 itself.
Does the Airprint certificate needs to be filled in? If yes, how?
First we installed the "Ricoh Smart Device Connector" app on the Iphone.
Then it asked for the QR code (which we don't know how to print it) OR to fill in this info:
the IP address (of the c3003), shared name, domain name, log in's.
Do they mean the log in's from the router?

Thank you (again!) for helping us out here.

Hope this helps also make sure package firmware is up to date and the apple device needs to be up to date

[slimslob]

First we installed the "Ricoh Smart Device Connector" app on the Iphone.
Then it asked for the QR code (which we don't know how to print it) OR to fill in this info:
the IP address (of the c3003), shared name, domain name, log in's.
Do they mean the log in's from the router?

Thank you (again!) for helping us out here.

If the C3003 has a SOP the QR code is displayed on the panel. If it does not have a SOP then you do not need the "Ricoh Smart Device Connector" app. Scanning the QR code gives the "Ricoh Smart Device Connector" app on the Iphone the needed connection information in order for the app to connect to the customer's WiFi.

[copier tech]

The SOP is available for the Cxx03 models as an option.

Yes, as I said on the smart operation panels.

Poster didnt state it was a Zsp model.

[ThePomqueteer]

Also keep in mind that they need to be on the same subnet, so if the phone is on a 192.168.1.x subnet and the copier is wired in on a 192.168.2.x subnet, Airprint will not work even if those 2 subnets can communicate. I see it fairly often where the wireless has a different subnet than their wired connection. In that case I usually just recommend the Smart Device connector app.

[slimslob]

Yes, as I said on the smart operation panels.

Poster didnt state it was a Zsp model.

But he did mention the "Ricoh Smart Device Connector" app which is only applicable to the SOP with the C3003.

[copier tech]

But he did mention the "Ricoh Smart Device Connector" app which is only applicable to the SOP with the C3003.

No, I used this to print to my home MP C305.

You can print to any Ricoh with this app via IP.

[Brianneoe]

IPP turned off will also cause AirPrint not to work.

[Mark Bbb]

Many thanks, gentlemen, for your help.
I will try this all asap.
It is a mpc3003exASP model...