Page 2 of 2 FirstFirst 12
Results 11 to 16 of 16
  1. #11
    Copier Technician 1,000+ Posts
    Ricoh mpc3003 ghost (repeating) image

    mga's Avatar
    Join Date
    Dec 2010
    Location
    london
    Posts
    1,250
    Rep Power
    121

    Re: Ricoh mpc3003 ghost (repeating) image

    Quote Originally Posted by Mark Bbb View Post
    I think this RTB is unique for mpc4503.
    Not?
    That is why the sp's where different.
    This technical bulletin is for metis series with is also the mpc3003 it does work also If using compatible toners adjust charge charge roller setting
    Not oem tonermpc2003/4 to mpc 6003/4 series adjust
    3612-131-132-133-134 K.,C,M&Y
    SET ALL TO 600
    Attached Files Attached Files

  2. #12
    Service Manager 1,000+ Posts
    Join Date
    Jun 2012
    Location
    Turnhout
    Posts
    1,439
    Rep Power
    39

    Re: Ricoh mpc3003 ghost (repeating) image

    Quote Originally Posted by mga View Post
    This technical bulletin is for metis series with is also the mpc3003 it does work also If using compatible toners adjust charge charge roller setting
    Not oem tonermpc2003/4 to mpc 6003/4 series adjust
    3612-131-132-133-134 K.,C,M&Y
    SET ALL TO 600
    Thanks, is this info you have obtained from Ricoh?

  3. #13
    Senior Tech 250+ Posts luca72's Avatar
    Join Date
    Oct 2017
    Location
    Milano, Italia
    Posts
    397
    Rep Power
    17

    Re: Ricoh mpc3003 ghost (repeating) image

    Quote Originally Posted by Mark Bbb View Post
    Hoi again,
    There where a lot of issues with upgrading firmware on this model and especially with this customer.
    I have posted this problem here earlier (as some of you will remember)... (I still think this is the issue).
    I already swapt the F.U. with another good working one, no good.
    I think that it only smears with color, but i'm not sure.
    Counter color 52K b&w 160K total 212K
    Thanks (again) for your help.

    Attachment 47781
    try to check the one-way bearings of the roller pressure drive unit, there is a gear in the fuser compartment on the right, disassemble the pressure motor, (find it behind the fan at the top, 2 screws) try to do with your finger - back and forth fast, if you see that the bearing runs off, it means that some pressure is lost, and it is necessary to disassemble and clean them, if too much was lost you would see sc569

    possibly disassembling the drive is not very difficult

    regards
    Attached Images Attached Images

  4. #14
    Copier Technician 1,000+ Posts
    Ricoh mpc3003 ghost (repeating) image

    mga's Avatar
    Join Date
    Dec 2010
    Location
    london
    Posts
    1,250
    Rep Power
    121

    Re: Ricoh mpc3003 ghost (repeating) image

    Quote Originally Posted by Mark Bbb View Post
    Thanks, is this info you have obtained from Ricoh?
    Yes it's a RTB the cold off set the other information re compatible toner is from katun UK technical dept

  5. #15
    Service Manager 1,000+ Posts
    Join Date
    Jun 2012
    Location
    Turnhout
    Posts
    1,439
    Rep Power
    39

    Re: Ricoh mpc3003 ghost (repeating) image

    We have put sp3612 - 131 132 133 134 all to 600 , and the paper thickness back to normal...

    NO GOOD.

    Medium thick solved this problem, but old office documents would give an paper thickness error as if the printer preferences would be saved together with the document...

    Any help would be very, very much appreciated!!!

  6. #16
    Service Manager 1,000+ Posts
    Ricoh mpc3003 ghost (repeating) image


    Join Date
    Nov 2007
    Location
    New Jersey
    Posts
    1,163
    Rep Power
    62

    Re: Ricoh mpc3003 ghost (repeating) image

    Quote Originally Posted by Mark Bbb View Post
    We have put sp3612 - 131 132 133 134 all to 600 , and the paper thickness back to normal...

    NO GOOD.

    Medium thick solved this problem, but old office documents would give an paper thickness error as if the printer preferences would be saved together with the document...

    Any help would be very, very much appreciated!!!
    There is a setting in user tools to change from computer command to machine settings, I can't remember where it is, I always have to search for it. That setting should help do away with the paper thickness message.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here