Page 1 of 2 12 LastLast
Results 1 to 10 of 13

Thread: Aficio 2022

  1. #1
    Senior Tech 250+ Posts
    Join Date
    Aug 2015
    Location
    Alexandroupolis, evros
    Posts
    414
    Rep Power
    0

    Aficio 2022

    When paper is at vertical (A4R) position , it prints with out problem . When paper A4 is horizontal position or using A3 paper we have paper jam . paper stops just before the exit. Paper cassete is set up cerrectly. Cleared all rollers , no obstacle in paper path, replaced exit sensors.
    Also when making double sided copies had no problem.
    Noticed that using paper that have made a little earlyier copies it works ok!
    Any idea where the problem is?

  2. #2
    Senior Tech 100+ Posts luca72's Avatar
    Join Date
    Oct 2017
    Location
    Milano, Italia
    Posts
    239
    Rep Power
    10

    Re: Aficio 2022

    Quote Originally Posted by Gab View Post
    When paper is at vertical (A4R) position , it prints with out problem . When paper A4 is horizontal position or using A3 paper we have paper jam . paper stops just before the exit. Paper cassete is set up cerrectly. Cleared all rollers , no obstacle in paper path, replaced exit sensors.
    Also when making double sided copies had no problem.
    Noticed that using paper that have made a little earlyier copies it works ok!
    Any idea where the problem is?


    hi, what does say "plotter jam history" ?
    HELP US KNOWING THIS: the Italian people are about to be crushed by
    a government of dishwashers and ex-DJ alternates, unelected, that with the excuse of covid 19 is applying a communist dictatorship of the worst kind !! not even in chile or nicaragua !!
    KNOW IT ALL!

  3. #3
    Retired 10,000+ Posts slimslob's Avatar
    Join Date
    May 2013
    Location
    Bakersfield, CA
    Posts
    13,276
    Rep Power
    338

    Re: Aficio 2022

    Lead edge stops just before the exit is very common symptom of a trail edge jam at the registration roller, trail edge detect is either too early or too late. Usually means that the actual paper length does not match what the tray is set for. With that old a machine the size switch could be bad. Check the paper size and orientation shown on the display panel exactly matches the paper in the tray.

  4. #4
    Geek Extraordinaire 2,500+ Posts KenB's Avatar
    Join Date
    Dec 2007
    Location
    Cleveland, Ohio
    Posts
    3,361
    Rep Power
    94

    Re: Aficio 2022

    With the machine being older than dirt, I would be highly suspect of any rubber or rubber-like feed roller or shaft, as I'm sure they have all deteriorated to a point where they can't feed reliably.

    If not done already, I think I would start there.
    Some days you’re the dog, some days you’re the fire hydrant.

  5. #5
    Senior Tech 100+ Posts semi's Avatar
    Join Date
    Sep 2008
    Location
    UK
    Posts
    150
    Rep Power
    27

    Re: Aficio 2022

    Pressure roller,had this many times out in the field-back in the day-might be time for a upgrade

  6. #6
    Senior Tech 250+ Posts
    Join Date
    Aug 2015
    Location
    Alexandroupolis, evros
    Posts
    414
    Rep Power
    0

    Re: Aficio 2022

    Quote Originally Posted by slimslob View Post
    Lead edge stops just before the exit is very common symptom of a trail edge jam at the registration roller, trail edge detect is either too early or too late. Usually means that the actual paper length does not match what the tray is set for. With that old a machine the size switch could be bad. Check the paper size and orientation shown on the display panel exactly matches the paper in the tray.
    I have checked the papoer size and orientation and it is ok (with this problem paper exits 3-4 cm and stops)

  7. #7
    Service Manager 10,000+ Posts
    Aficio 2022

    Phil B.'s Avatar
    Join Date
    Jul 2016
    Location
    Raleigh NC
    Posts
    11,026
    Rep Power
    263

    Re: Aficio 2022

    are there parts still available for these dino's?

  8. #8
    Retired 10,000+ Posts slimslob's Avatar
    Join Date
    May 2013
    Location
    Bakersfield, CA
    Posts
    13,276
    Rep Power
    338

    Re: Aficio 2022

    Quote Originally Posted by Gab View Post
    I have checked the papoer size and orientation and it is ok (with this problem paper exits 3-4 cm and stops)
    Then what is the jam code? That will tell us exactly which sensor and whether it is a 'late' jam, lead edge, or 'lag' jam, trail edge. I mean the numeric jam code not the letter location code. You may also want to look at SC 5707 Plotter Jam History as it will also show you what size the 2022 thinks was running through.

    And in your original post you said the paper was stopping before the exit but now it has moved to 3-4 cm past the exit, which is it?
    Last edited by slimslob; 1 Week Ago at 01:54 AM.

  9. #9
    Senior Tech 250+ Posts
    Join Date
    Aug 2015
    Location
    Alexandroupolis, evros
    Posts
    414
    Rep Power
    0

    Re: Aficio 2022

    Quote Originally Posted by slimslob View Post
    Then what is the jam code? That will tell us exactly which sensor and whether it is a 'late' jam, lead edge, or 'lag' jam, trail edge. I mean the numeric jam code not the letter location code. You may also want to look at SC 5707 Plotter Jam History as it will also show you what size the 2022 thinks was running through.

    And in your original post you said the paper was stopping before the exit but now it has moved to 3-4 cm past the exit, which is it?
    I said just before the exit . Actuallly it looks like it stops little earlier and till rollers stops it reaches just the before exit. Later i said i know the problem when someone has different paper in cassete and he has,t set up coerrect the cassete . At this case it stops 3-4 cm after the exit. It is not the same with this case.
    Also i am wondering why it works fine at duplex copies also when i use paper that i have used just before to make copies it works fine almost in all copies.

  10. #10
    Field Supervisor 500+ Posts Gift's Avatar
    Join Date
    Mar 2011
    Location
    Gothenburg
    Posts
    932
    Rep Power
    34

    Re: Aficio 2022

    Quote Originally Posted by semi View Post
    Pressure roller,had this many times out in the field-back in the day-might be time for a upgrade
    You're right and not bad - I never would have recalled that

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here