SPC820

[methogod]

1,191,643 on meter...

Toner Auger broke, def was packing waste...
replaced from auger. seems to be good...

Having density issues... light coverage prints good, any color mixing seems to have density issues.

Also having issues with spotting random black toner. On non print side.

Going back to swap fusers and black drum. See if any better.

[Phil B.]

1,191,643 on meter...

Toner Auger broke, def was packing waste...
replaced from auger. seems to be good...

Having density issues... light coverage prints good, any color mixing seems to have density issues.

Also having issues with spotting random black toner. On non print side.

Going back to swap fusers and black drum. See if any better.

clean density sensors ... run ACC

replace any parts over PM counts .. clear counts on those parts ONLY

[methogod]

clean density sensors ... run ACC

replace any parts over PM counts .. clear counts on those parts ONLY

Pulled ID sensor, cleaned it well....

did auto reg, auto density.
printed both test prints.
Dropbox - SKMBT_C45121012223250.pdf - Simplify your life
Not familiar with Ricohs... Or the lingo... "ACC"
i'm a konica guy... I know sorry.

Thanks,

[methogod]

clean density sensors ... run ACC

replace any parts over PM counts .. clear counts on those parts ONLY

Pulled ID sensor, cleaned it well....

did auto reg, auto density.
printed both test prints.
Dropbox - SKMBT_C45121012223250.pdf - Simplify your life
Not familiar with Ricohs... Or the lingo... "ACC"
i'm a konica guy... I know sorry.

Thanks,

[methogod]

Seems to have fixed most issues. no more scattering.
Print quality looks sellable.

Is there a setting where it check density ever XXX pages or distance - now it seems like every 50-60 envelopes it adjusts. Should be able to set that to longer adjust schedule.


Just don't understand the SP MODES and how or why its so cryptic.... love the little printers..

I get dip switches, just not real trouble shooting guides.

Be glad to buy you coffee....

[slimslob]

Pulled ID sensor, cleaned it well....

did auto reg, auto density.
printed both test prints.
Dropbox - SKMBT_C45121012223250.pdf - Simplify your life
Not familiar with Ricohs... Or the lingo... "ACC"
i'm a konica guy... I know sorry.

Thanks,

ACC = Auto Color Calibration. It is an operator maintenance function found in user tools.