Thanks: 
Likes: a toner of cyan is not recognized when i replaced it
Dislikes: 0
ricoh mpc4000
a toner of cyan is not recognized when i replaced it
Originally Posted by stevekiv
Most likely your cyan toner pump has failed or the pipe is blocked.
You can swap the pump with another colour as a test.
Let us eat, drink, and be merry, because tomorrow we may die!
For all your firmware & service manual needs please visit us at:
www.copierfirmware.co.uk - www.printerfirmware.co.uk
Bad RFID board.
if it doesn't work one is the bottle, if no cyano bottle works, it could be the pump, take apart the pcdu and look into the hole where the toner falls inside, if it is empty it is the pump, if it is full to burst, it is broken there axis of some agitator in the developer unit, check also the rear plastic gear
Reply With Quote
Bookmarks