Hoi,
Selecting medium thick, problem solved.
Firmware downloaded via old my-ricoh.com (not octopus, demand for account today).
Is this engine firmware up to date: D1475504F 1.42:08 16/5/2020 ?
Thank you (again) for your help.
Hoi,
Selecting medium thick, problem solved.
Firmware downloaded via old my-ricoh.com (not octopus, demand for account today).
Is this engine firmware up to date: D1475504F 1.42:08 16/5/2020 ?
Thank you (again) for your help.
Let us eat, drink, and be merry, because tomorrow we may die!
For all your firmware & service manual needs please visit us at:
www.copierfirmware.co.uk - www.printerfirmware.co.uk
Only time we have had the new belts not fusing is due to a broken lamp, or the thermal fuse needing resetting.
Regards Mark
FOR TRADE AND END USER SERVICE CALLS PLEASE VISIT WEB SITE FOR CONTACT DETAILS. COVERING GREATER LONDON {UK} AND ALL SURROUNDING COUNTIES.
RICOH, CANON, KYOCERA, KONICA, SHARP, HP/SAMSUNG BROTHER, LEXMARK.
https://copierservices.simdif.com
D1475504F 1.42:08 16/5/2020
Is this the latest engine firmware?
Hey guy's, don't let me down!
UPDATE
Medium thick paper setting will solve all problems at once, without replacing anything.
If setting on normal paper, and replacing pressure roller, sleeve roller and exit guide (bent) will solve the color smear (smudge?), but not the black offset (solid black).
Offset will be less (but not totally solved) using parallel black toner.
=> fusing matter.
But i already tested with higher fusing temp, no good.
Firmware is up to date.
Bookmarks