Page 1 of 2 12 LastLast
Results 1 to 10 of 20
  1. #1
    Service Manager 1,000+ Posts
    Join Date
    Jun 2012
    Location
    Turnhout
    Posts
    1,397
    Rep Power
    38

    mpc3003 offset (ghost image) after sleeve unit replaced

    Hoi,
    Selecting medium thick, problem solved.
    Firmware downloaded via old my-ricoh.com (not octopus, demand for account today).
    Is this engine firmware up to date: D1475504F 1.42:08 16/5/2020 ?
    Thank you (again) for your help.

  2. #2
    Service Manager 5,000+ Posts
    mpc3003 offset (ghost image) after sleeve unit replaced

    copier tech's Avatar
    Join Date
    Jan 2014
    Location
    London
    Posts
    5,848
    Rep Power
    134

    Re: mpc3003 offset (ghost image) after sleeve unit replaced

    Quote Originally Posted by Mark Bbb View Post
    Hoi,
    Selecting medium thick, problem solved.
    Firmware downloaded via old my-ricoh.com (not octopus, demand for account today).
    Is this engine firmware up to date: D1475504F 1.42:08 16/5/2020 ?
    Thank you (again) for your help.

    If this happened after you replaced the fuser sleeve retrace your steps.

    Also what part number sleeve did you replace?

    Let us eat, drink, and be merry, because tomorrow we may die!

    For all your firmware & service manual needs please visit us at:

    www.copierfirmware.co.uk - www.printerfirmware.co.uk




  3. #3
    Service Manager 1,000+ Posts
    Join Date
    Jun 2012
    Location
    Turnhout
    Posts
    1,397
    Rep Power
    38

    Re: mpc3003 offset (ghost image) after sleeve unit replaced

    Quote Originally Posted by copier tech View Post
    If this happened after you replaced the fuser sleeve retrace your steps.

    Also what part number sleeve did you replace?

    D1464042
    We buy many machines from auctions, so we don't know their history, and mostly they have these weird troubles.
    But in fact only on the mpc3003 series, we have no trouble with all other models.

  4. #4
    Trusted Tech 50+ Posts ridgemill's Avatar
    Join Date
    Sep 2017
    Location
    Bristol
    Posts
    84
    Rep Power
    10

    Re: mpc3003 offset (ghost image) after sleeve unit replaced

    Only time we have had the new belts not fusing is due to a broken lamp, or the thermal fuse needing resetting.

  5. #5
    Copier Technician 1,000+ Posts
    mpc3003 offset (ghost image) after sleeve unit replaced

    mga's Avatar
    Join Date
    Dec 2010
    Location
    london
    Posts
    1,184
    Rep Power
    114

    Re: mpc3003 offset (ghost image) after sleeve unit replaced

    Quote Originally Posted by Mark Bbb View Post
    Hoi,
    Selecting medium thick, problem solved.
    Firmware downloaded via old my-ricoh.com (not octopus, demand for account today).
    Is this engine firmware up to date: D1475504F 1.42:08 16/5/2020 ?
    Thank you (again) for your help.
    There is a cold offset RTB for this you could try that also
    Not oem tonermpc2003/4 to mpc 6003/4 series adjust
    3612-131-132-133-134 K.,C,M&Y
    SET ALL TO 600

  6. #6
    Service Manager 1,000+ Posts
    Join Date
    Jun 2012
    Location
    Turnhout
    Posts
    1,397
    Rep Power
    38

    Re: mpc3003 offset (ghost image) after sleeve unit replaced

    D1475504F 1.42:08 16/5/2020
    Is this the latest engine firmware?

  7. #7
    Service Manager 1,000+ Posts
    Join Date
    Jun 2012
    Location
    Turnhout
    Posts
    1,397
    Rep Power
    38

    Re: mpc3003 offset (ghost image) after sleeve unit replaced

    Quote Originally Posted by ridgemill View Post
    Only time we have had the new belts not fusing is due to a broken lamp, or the thermal fuse needing resetting.
    If this would be the case, the machine would give an error code like sc542 or something like that.

  8. #8
    Service Manager 1,000+ Posts
    Join Date
    Jun 2012
    Location
    Turnhout
    Posts
    1,397
    Rep Power
    38

    Re: mpc3003 offset (ghost image) after sleeve unit replaced

    Hey guy's, don't let me down!

  9. #9
    Senior Tech 250+ Posts Polo-022's Avatar
    Join Date
    Sep 2007
    Posts
    394
    Rep Power
    31

    Re: mpc3003 offset (ghost image) after sleeve unit replaced

    Quote Originally Posted by Mark Bbb View Post
    Hey guy's, don't let me down!
    Nope, never!!
    This is the latest Engine firmware you mentioned above..

  10. #10
    Service Manager 1,000+ Posts
    Join Date
    Jun 2012
    Location
    Turnhout
    Posts
    1,397
    Rep Power
    38

    Re: mpc3003 offset (ghost image) after sleeve unit replaced

    UPDATE
    Medium thick paper setting will solve all problems at once, without replacing anything.
    If setting on normal paper, and replacing pressure roller, sleeve roller and exit guide (bent) will solve the color smear (smudge?), but not the black offset (solid black).
    Offset will be less (but not totally solved) using parallel black toner.
    => fusing matter.
    But i already tested with higher fusing temp, no good.
    Firmware is up to date.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here