Page 1 of 2 12 LastLast
Results 1 to 10 of 12
  1. #1
    Junior Member
    Join Date
    Mar 2018
    Posts
    7
    Rep Power
    0

    Ricoh IM C4500 - Waiting for firmware update data... Please wait.

    Hello,

    Have a problem starting up the Ricoh IM C4500.
    Tried to update the firmware remotely using Web Image Monitor.

    It's partially failed and now displaying the following message:

    Waiting for firmware update data...
    IPV4 address: XXX.XXX.XXX.XXX
    Please wait.

    I cannot enter SP mode. Nothings works. Can ping the device Ok.

    Anyone can advise if there is any methods to recover the device?

    Thanks.
    Edit Report

  2. #2
    Service Manager 1,000+ Posts
    Join Date
    Jun 2012
    Location
    Turnhout
    Posts
    1,437
    Rep Power
    39

    Re: Ricoh IM C4500 - Waiting for firmware update data... Please wait.

    Oeps, i think you messed it up by interrupting the firmware download.
    Did you?

  3. #3
    Field Supervisor 500+ Posts
    Ricoh IM C4500 - Waiting for firmware update data... Please wait.

    GIUBOSS's Avatar
    Join Date
    Jul 2013
    Location
    Roma
    Posts
    615
    Rep Power
    42

    Re: Ricoh IM C4500 - Waiting for firmware update data... Please wait.

    Quote Originally Posted by lokki View Post
    Hello,

    Have a problem starting up the Ricoh IM C4500.
    Tried to update the firmware remotely using Web Image Monitor.

    It's partially failed and now displaying the following message:

    Waiting for firmware update data...
    IPV4 address: XXX.XXX.XXX.XXX
    Please wait.

    I cannot enter SP mode. Nothings works. Can ping the device Ok.

    Anyone can advise if there is any methods to recover the device?

    Thanks.

    Edit Report
    what firmware were you updating? the whole package or single? You have to repeat the procedure using another method and try again with another file with usb or sd card.

  4. #4
    Service Manager 10,000+ Posts
    Ricoh IM C4500 - Waiting for firmware update data... Please wait.

    Phil B.'s Avatar
    Join Date
    Jul 2016
    Location
    Raleigh NC
    Posts
    14,125
    Rep Power
    370

    Re: Ricoh IM C4500 - Waiting for firmware update data... Please wait.

    Quote Originally Posted by GIUBOSS View Post
    what firmware were you updating? the whole package or single? You have to repeat the procedure using another method and try again with another file with usb or sd card.
    is that procedure in the SM? (i'm sure it is)

  5. #5
    Service Manager 5,000+ Posts
    Ricoh IM C4500 - Waiting for firmware update data... Please wait.

    copier tech's Avatar
    Join Date
    Jan 2014
    Location
    London
    Posts
    5,949
    Rep Power
    137

    Re: Ricoh IM C4500 - Waiting for firmware update data... Please wait.

    Quote Originally Posted by lokki View Post
    Hello,

    Have a problem starting up the Ricoh IM C4500.
    Tried to update the firmware remotely using Web Image Monitor.

    It's partially failed and now displaying the following message:

    Waiting for firmware update data...
    IPV4 address: XXX.XXX.XXX.XXX
    Please wait.

    I cannot enter SP mode. Nothings works. Can ping the device Ok.

    Anyone can advise if there is any methods to recover the device?

    Thanks.

    Edit Report
    Use the SD card update method this will recover your error.




    Let us eat, drink, and be merry, because tomorrow we may die!

    For all your firmware & service manual needs please visit us at:

    www.copierfirmware.co.uk - www.printerfirmware.co.uk




  6. #6
    Junior Member
    Join Date
    Mar 2018
    Posts
    7
    Rep Power
    0

    Re: Ricoh IM C4500 - Waiting for firmware update data... Please wait.

    Just to clarify. I was attempting firmware update over the network, remotely.
    Not sure what's happened, but found I've lost communication with the embed. server.
    Visiting office, found the machine in the above mentioned state. "Waiting for firmware update data.."

    And yes, I've tried SD card firmware update, cannot enter the SP mode.
    806182 used to enter. Reset - 8-0-6-1-8-2 - C
    D0BN5592K.pkg was used for update.

    SD card is detected by machine - can see the icon.

    Any suggestions?

  7. #7
    Retired 10,000+ Posts slimslob's Avatar
    Join Date
    May 2013
    Location
    Bakersfield, CA
    Posts
    14,942
    Rep Power
    410

    Re: Ricoh IM C4500 - Waiting for firmware update data... Please wait.

    Installing firmware using a SD Card has nothing to do with SP mode. Download the firmware, extract it from the .zip file and load it to the SD card. Power the C5400 off. Insert the SD card into the service slot on the controller. Power the C4500 back on. Follow the instructions of the screen.

  8. #8
    Technician
    Join Date
    Feb 2021
    Location
    phoenix, Arizona
    Posts
    18
    Rep Power
    1

    Re: Ricoh IM C4500 - Waiting for firmware update data... Please wait.

    Quote Originally Posted by GIUBOSS View Post
    what firmware were you updating? the whole package or single? You have to repeat the procedure using another method and try again with another file with usb or sd card.

    I second that.
    You need to have .fwu files for the same.
    the WIM files cannot work with the USB/SD CARD.
    Thanks.

  9. #9
    Retired 10,000+ Posts slimslob's Avatar
    Join Date
    May 2013
    Location
    Bakersfield, CA
    Posts
    14,942
    Rep Power
    410

    Re: Ricoh IM C4500 - Waiting for firmware update data... Please wait.

    Quote Originally Posted by satins View Post
    I second that.
    You need to have .fwu files for the same.
    the WIM files cannot work with the USB/SD CARD.
    Thanks.
    I got the impression that he was trying to setup automatic updates through SP settings. I also get the impression that he is not an authorized Ricoh trained tech and not knowing WTF he was doing ended up screwing the pooch.

  10. #10
    Service Manager 5,000+ Posts
    Ricoh IM C4500 - Waiting for firmware update data... Please wait.

    copier tech's Avatar
    Join Date
    Jan 2014
    Location
    London
    Posts
    5,949
    Rep Power
    137

    Re: Ricoh IM C4500 - Waiting for firmware update data... Please wait.

    Quote Originally Posted by lokki View Post
    Just to clarify. I was attempting firmware update over the network, remotely.
    Not sure what's happened, but found I've lost communication with the embed. server.
    Visiting office, found the machine in the above mentioned state. "Waiting for firmware update data.."

    And yes, I've tried SD card firmware update, cannot enter the SP mode.
    806182 used to enter. Reset - 8-0-6-1-8-2 - C
    D0BN5592K.pkg was used for update.

    SD card is detected by machine - can see the icon.

    Any suggestions?
    Copy the .pkg file to a folder named package onto the root of your SD card. (card must be no larger than 4GB & newer SD cards will not work.)

    Insert the card into the service slot (lower) & power on the machine.

    For your information your package file D0BN5592K is outdated!

    The later version is D0BN5592W Ver.3.53


    Let us eat, drink, and be merry, because tomorrow we may die!

    For all your firmware & service manual needs please visit us at:

    www.copierfirmware.co.uk - www.printerfirmware.co.uk




Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here