Results 1 to 4 of 4
  1. #1
    Senior Tech 100+ Posts
    Join Date
    Jul 2014
    Location
    baghdad
    Posts
    124
    Rep Power
    0

    sc921 in garment RI2000

    hi every one

    i have in printer garment a RI 2000 printer its new .. The problem occurred during the installation process and after following the steps in the service manual and the printer was ready for printing .. so when the Nozzle check was made, it was found that the high adjustment was not working and the table did not work and did nit rise up , and it gave the code 921 ...

    Note : is there any way to test the (left table motor )??

    best regrads

  2. #2
    Senior Tech 2,500+ Posts
    sc921 in garment RI2000

    mikadonovan's Avatar
    Join Date
    May 2008
    Location
    Indianapolis, Indiana
    Posts
    2,920
    Rep Power
    99

    Re: sc921 in garment RI2000

    I have been working on Ricoh's for 30 years, and I had no idea these Ricoh shirt printers even existed. That is probably why there is a lack of posts on this thread. Nor could I locate any technical info on the model in the database.
    NEVER ASSUME ANYTHING

  3. #3
    Retired 10,000+ Posts
    sc921 in garment RI2000

    slimslob's Avatar
    Join Date
    May 2013
    Location
    Bakersfield, CA
    Posts
    34,131
    Rep Power
    989

    Re: sc921 in garment RI2000

    Quote Originally Posted by mikadonovan View Post
    I have been working on Ricoh's for 30 years, and I had no idea these Ricoh shirt printers even existed. That is probably why there is a lack of posts on this thread. Nor could I locate any technical info on the model in the database.
    The closest that I can think of would be one of the inkjet/geljet wide formats that Ricoh had.

  4. #4
    Professional Moron 2,500+ Posts TonerMunkeh's Avatar
    Join Date
    Apr 2008
    Location
    Shitsville, UK
    Posts
    3,852
    Rep Power
    108

    Re: sc921 in garment RI2000

    921 Platen height sensor error while platen table was rising
    Platen height sensor did not detect the platen table rising
    • Platen lift motor defective
    • Platen lift motor connection defective
    • Platen height sensor defective
    • Platen height sensor connection defective
    • Platen table up operation obstructed
    1. Cycle the printer on/off.
    2. Adjust the platen height sensor.
    3. Replace the platen height sensor.
    4. Reconnect or replace the harness to the platen table.
    5. Replace the platen table.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here