Ricoh Pro C7100X SP mode

[aAandy]

You need a trained tech, there are plenty in Brisbane.

i guess my 38 years of field service experience doesn't quite cut it huh?

[aAandy]

NO!
And Why not try what I actually suggested?
And how dare you YELL at me for providing some insight!
Factory mode has been discussed here on several threads, but a public forum is no place for such a thing!
Seems like you have no business working on that class of machine anyway.

bit of an asshole huh? then don't bother replying! insight my ass!!!! the answer was in my query numbnuts

[slimslob]

thank you!

That is assuming it hasn't been changed by another tech.

[slimslob]

hello everyone

i have all the manuals for this machine, however the manual states clearly

Entering SP Mode:
For details, ask your supervisor

also googled to no avail! does anyone know if it's C107c, or C806182c, or something other?

please advise! thanks in advance

Andy

Ricoh changed the service access code and removed it from new service manuals once because too many untrained, unauthorized individuals were causing damage by using it inappropriately. The next time they decide to change it, they will do it in a firmware update and unless you have direct access to a regional rep.

[slimslob]

bit of an asshole huh? then don't bother replying! insight my ass!!!! the answer was in my query numbnuts

Actually Sandy is one of the most helpful people on this site. Keep going the way you are and you are going to quickly become a persona non grata.

[Phil B.]

Actually Sandy is one of the most helpful people on this site. Keep going the way you are and you are going to quickly become a persona non grata.

It appears CTN is getting an influx of these types lately. Pissy people that expect everything for free, thinking THEY are right when they have no clue what's going on. And when you mention contributing to the site, they demand you GIVE them what they requested. Ungrateful people really piss me off.

Sent from my SM-G960U using Tapatalk

[davel]

i guess my 38 years of field service experience doesn't quite cut it huh?

My 40 plus years of working in Ricoh machines did not teach me how to get into service mode on other brands.

[tsbservice]

Actually Sandy is one of the most helpful people on this site. Keep going the way you are and you are going to quickly become a persona non grata.

This is true and I agree. Although aAandy actually used 'please' and 'thanks' few times before thread went downhill.

[Phil B.]

bit of an asshole huh? then don't bother replying! insight my ass!!!! the answer was in my query numbnuts

what an ungrateful buttmunch. keep that 'tude up and you COULD be banned from CTN

[mga]

hello everyone

i have all the manuals for this machine, however the manual states clearly

Entering SP Mode:
For details, ask your supervisor

also googled to no avail! does anyone know if it's C107c, or C806182c, or something other?

please advise! thanks in advance

Andy

It would be reset {yellow key} for the 1st key not C