Ricoh Aficio 2051 stains

**Camzlo** · 04-10-2021

Originally Posted by luca72

when it gets to those levels, who knows what a crazy mess there will be inside the machine!?! even the sponges, they will all be rotten to stick to clothes, you need to think about it a bit, almost 4000k of prints are a lot, and the machine is really old, is it economically sustainable to replace the consumables? perhaps with those numbers it is worth buying a new, smaller machine

Hi, this?

Developing Sponge Sealing For Ricoh 1075 2075 8001 9001 6001 6002 5500 6000 6500 | eBay

**slimslob** · 04-10-2021

Originally Posted by Camzlo

Hi, this?

Developing Sponge Sealing For Ricoh 1075 2075 8001 9001 6001 6002 5500 6000 6500 | eBay

I recommend using only those directly from Ricoh.

**luca72** · 04-10-2021

Originally Posted by Camzlo

Hi, this?

Developing Sponge Sealing For Ricoh 1075 2075 8001 9001 6001 6002 5500 6000 6500 | eBay

not only that, the most bastard ones, are the ones where there is the air filter of the drum, they go everywhere, and make the job very boring

**fshead** · 04-11-2021

Originally Posted by slimslob

I recommend using only those directly from Ricoh.

honestly i ve bought a lot of ricoh parts on ebay and they looked just like OEM.
I would take everything out and use a compressor to blow out the inside of unit and then reassemble it.
The mylar under the drum bends over time and need to be replaced as well as all the foam seals.