Results 1 to 10 of 10

Thread: Problema MP 501

  1. #1
    Junior Member
    Join Date
    Jun 2020
    Location
    Aracatu,Maceió
    Posts
    4
    Rep Power
    0

    Problema MP 501

    Good afternoon people.
    I have a problem with an MP 501, I will try to explain as much as possible what happens in it.
    When we turn on the printer, it activates an axis that is above the duplex, that axis when it rotates from the pressure in the roller, there is a sensor there, but that axis does not stop rotating, we change the plate that it acts, fusion, some motors and it does not for never. The only plate we didn't change was BICU. I wonder if anyone has any other tips?

    thanks!

  2. #2
    Service Manager 10,000+ Posts
    Problema MP 501

    Phil B.'s Avatar
    Join Date
    Jul 2016
    Location
    Raleigh NC
    Posts
    13,231
    Rep Power
    340

    Re: Problema MP 501

    Quote Originally Posted by fvargasbarrote View Post
    Good afternoon people.
    I have a problem with an MP 501, I will try to explain as much as possible what happens in it.
    When we turn on the printer, it activates an axis that is above the duplex, that axis when it rotates from the pressure in the roller, there is a sensor there, but that axis does not stop rotating, we change the plate that it acts, fusion, some motors and it does not for never. The only plate we didn't change was BICU. I wonder if anyone has any other tips?

    thanks!
    plate BICU? do you mean the PCB BICU?

  3. #3
    Service Manager 1,000+ Posts
    Problema MP 501


    Join Date
    Nov 2007
    Location
    New Jersey
    Posts
    1,147
    Rep Power
    62

    Re: Problema MP 501

    You have got to a better job describing the problem, do you have an error code or a jam code?

  4. #4
    Retired 10,000+ Posts slimslob's Avatar
    Join Date
    May 2013
    Location
    Bakersfield, CA
    Posts
    14,520
    Rep Power
    393

    Re: Problema MP 501

    Try describing the problem in your native language and then use an online translator to translate it to English.

    Tente descrever o problema em seu idioma nativo e, em seguida, use um tradutor online para traduzi-lo para o inglês.

  5. #5
    Service Manager 10,000+ Posts
    Problema MP 501

    Phil B.'s Avatar
    Join Date
    Jul 2016
    Location
    Raleigh NC
    Posts
    13,231
    Rep Power
    340

    Re: Problema MP 501

    Quote Originally Posted by slimslob View Post
    Try describing the problem in your native language and then use an online translator to translate it to English.

    Tente descrever o problema em seu idioma nativo e, em seguida, use um tradutor online para traduzi-lo para o inglês.
    Yeah and pics of the item would help also.

    Sent from my SM-G960U using Tapatalk

  6. #6
    Junior Member
    Join Date
    Jun 2020
    Location
    Aracatu,Maceió
    Posts
    4
    Rep Power
    0

    Re: Problema MP 501

    Good morning folks, on the interlocking topic that occurs in MP 501 (duplex only).
    I will wake up better as requested what already approved in it. The actuator (M2812833 ACTUATOR ENVELOPE) rotates constantly.








    Jam code: Jam 077 - (Paper exit sensor full: Late jam (In paper feed
    duplex unit)
    Sensor cleaning: M2812841 OPT SP PARTS SENSOR
    Cleaning the sensors on the board: M2812837 - HIGH VOLTAGE SP
    Replaced Plate: M2812837 - HIGH VOLTAGE SP
    Fusion changed (for testing only).
    Firmware update.


    I send the image of the axis sensor that keeps rotating constantly.
    Last edited by fvargasbarrote; 3 Weeks Ago at 06:15 PM.

  7. #7
    Service Manager 10,000+ Posts
    Problema MP 501

    Phil B.'s Avatar
    Join Date
    Jul 2016
    Location
    Raleigh NC
    Posts
    13,231
    Rep Power
    340

    Re: Problema MP 501

    Quote Originally Posted by fvargasbarrote View Post
    Bom dia pessoal, sobre o tópico de encravamento que ocorre na MP 501 (somente no duplex).
    vou detalhar melhor como solicitado o que já fizemos nela. O atuador (M2812833 ACTUATOR ENVELOPE) fica girando constantemente.




    Código de encravamenteo: Jam 077 - ( Paper exit full sensor: Late jam (When paper feed
    from duplex unit)
    Limpeza do sensor: M2812841 PARTS SENSOR OPT SP
    Limpeza dos sensores na placa: M2812837 - HIGH VOLTAGE SP
    Trocada Placa: M2812837 - HIGH VOLTAGE SP
    Trocada Fusão (apenas para teste).
    Atualização de firmware.

    Mando a imagem do sensor eixo que fica girando constantemente.

    Slim said to translate into english from your native language

  8. #8
    Copier Technician 1,000+ Posts
    Problema MP 501

    mga's Avatar
    Join Date
    Dec 2010
    Location
    london
    Posts
    1,190
    Rep Power
    114

    Re: Problema MP 501

    Very sorry iam struggling to understand what you are talking about in your wording can you try to be clearer are you a engineer.

  9. #9
    Service Manager 10,000+ Posts
    Problema MP 501

    Phil B.'s Avatar
    Join Date
    Jul 2016
    Location
    Raleigh NC
    Posts
    13,231
    Rep Power
    340

    Re: Problema MP 501

    Quote Originally Posted by mga View Post
    Very sorry iam struggling to understand what you are talking about in your wording can you try to be clearer are you a engineer.
    he claims to be a tech:

    About fvargasbarrote

    Real Name:FábioCountry:BrazilWhere are you from (City, State):Porto Alegre, Rio Grande do SulTechnician Status:Technician (2-10 Yrs)What Year Did You Start in this Industry:2012Most Hated Brand:LexmarkWhat was the first machine you worked on:Ricoh MP 1515Last machine you were formally trained on:MP 305

  10. #10
    Copier Technician 1,000+ Posts
    Problema MP 501

    mga's Avatar
    Join Date
    Dec 2010
    Location
    london
    Posts
    1,190
    Rep Power
    114

    Re: Problema MP 501

    Quote Originally Posted by Phil B. View Post
    he claims to be a tech:

    About fvargasbarrote

    Real Name:FábioCountry:BrazilWhere are you from (City, State):Porto Alegre, Rio Grande do SulTechnician Status:Technician (2-10 Yrs)What Year Did You Start in this Industry:2012Most Hated Brand:LexmarkWhat was the first machine you worked on:Ricoh MP 1515Last machine you were formally trained on:MP 305

    I did notice that that's why I asked.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here