Hi friends, My machine mpc3002 got problem when paper come out from exit section it's getting rolled up like i attached the image. If anybody knows how to solve this problem please teach me. Thank you.
Hi friends, My machine mpc3002 got problem when paper come out from exit section it's getting rolled up like i attached the image. If anybody knows how to solve this problem please teach me. Thank you.
Let us eat, drink, and be merry, because tomorrow we may die!
For all your firmware & service manual needs please visit us at:
www.copierfirmware.co.uk - www.printerfirmware.co.uk
Lol print quality does also not look very nice
It's indeed an issue with the paper/enviroment - you can try to mc-gyverfy* the internal output tray or order the modified one (I think that came with the MPC3002 IIRC)
*If you have some trash ricohs, then rip of a duplex paper output thingy that's below the scanner and put it on the paper output tray. Find a good position and use a little hot glue.
If you are using 80gsm paper check the tray setting is set to 80gsm.
Changing Paper Thickness Settings
Let us eat, drink, and be merry, because tomorrow we may die!
For all your firmware & service manual needs please visit us at:
www.copierfirmware.co.uk - www.printerfirmware.co.uk
Here you have a link where you can download the user manual in different languages.
You need to go into system settings>paper tray settings
I dont know in detail for your machine, but you should find all those settings explained in the user manual.
MP C3004/C3504 series download page
Let us eat, drink, and be merry, because tomorrow we may die!
For all your firmware & service manual needs please visit us at:
www.copierfirmware.co.uk - www.printerfirmware.co.uk
Let us eat, drink, and be merry, because tomorrow we may die!
For all your firmware & service manual needs please visit us at:
www.copierfirmware.co.uk - www.printerfirmware.co.uk
Bookmarks