Results 1 to 9 of 9
  1. #1
    Senior Tech 100+ Posts
    Join Date
    Dec 2005
    Location
    CA
    Posts
    149
    Rep Power
    34

    Pro 8210 with code SC513-11

    I have a Pro 8210
    With a code SC513-11, has anyone seen this issue before,
    So any help would be appreciated
    Thank you
    Last edited by toddanderson; 04-23-2021 at 09:15 PM.

  2. #2
    Retired 10,000+ Posts slimslob's Avatar
    Join Date
    May 2013
    Location
    Bakersfield, CA
    Posts
    14,993
    Rep Power
    412

    Re: Pro 8210 with code SC513-11

    If you have no formal training on Ricoh Production models you should not be trying to work on them.

  3. #3
    Copier Technician 1,000+ Posts
    Pro 8210 with code SC513-11

    mga's Avatar
    Join Date
    Dec 2010
    Location
    london
    Posts
    1,251
    Rep Power
    121

    Re: Pro 8210 with code SC513-11

    On a production machine you will better of calling a credited ricoh production engineer you could doing more damage than good.

  4. #4
    Service Manager 10,000+ Posts
    Pro 8210 with code SC513-11

    Phil B.'s Avatar
    Join Date
    Jul 2016
    Location
    Raleigh NC
    Posts
    14,197
    Rep Power
    374

    Re: Pro 8210 with code SC513-11

    Quote Originally Posted by slimslob View Post
    If you have no formal training on Ricoh Production models you should not be trying to work on them.
    +1

  5. #5
    Service Manager 10,000+ Posts
    Pro 8210 with code SC513-11

    Phil B.'s Avatar
    Join Date
    Jul 2016
    Location
    Raleigh NC
    Posts
    14,197
    Rep Power
    374

    Re: Pro 8210 with code SC513-11

    Quote Originally Posted by mga View Post
    On a production machine you will better of calling a credited ricoh production engineer you could doing more damage than good.
    exactly

  6. #6
    Senior Tech 100+ Posts
    Join Date
    Dec 2005
    Location
    CA
    Posts
    149
    Rep Power
    34

    Re: Pro 8210 with code SC513-11

    Thanks for everyone's help. I replaced the Hp sensor .
    The issue is intermittent we will see if the sensor takes care of the issue


    Quote Originally Posted by toddanderson View Post
    I have a Pro 8210
    With a code SC513-11, has anyone seen this issue before,
    So any help would be appreciated
    Thank you

  7. #7
    Trusted Tech 50+ Posts
    Join Date
    Jul 2016
    Posts
    60
    Rep Power
    11

    Re: Pro 8210 with code SC513-11

    check drawer unit connectors on rear machine right side facing from front. have had 4 machines throw this code and every one was a 82xx model ad they all had broken connectors on the either the main frame side or drawer unit side. or both. idiots slamming the drawer unit back in really hard or an obstruction blocking the contacts usually will do it.

  8. #8
    Senior Tech 100+ Posts
    Join Date
    Dec 2005
    Location
    CA
    Posts
    149
    Rep Power
    34

    Re: Pro 8210 with code SC513-11

    Thank you we will give that a try

    Quote Originally Posted by JaysOnTheEDGE View Post
    check drawer unit connectors on rear machine right side facing from front. have had 4 machines throw this code and every one was a 82xx model ad they all had broken connectors on the either the main frame side or drawer unit side. or both. idiots slamming the drawer unit back in really hard or an obstruction blocking the contacts usually will do it.

  9. #9
    Senior Tech 100+ Posts
    Join Date
    Apr 2021
    Location
    Tromsψ
    Posts
    114
    Rep Power
    3

    Re: Pro 8210 with code SC513-11

    For what it's worth...

    • Code: SC513-11
    • Description: Trailing edge shift unit HP sensor error 1: Initialization
    • Causes: Normally, the shift unit HP sensor goes ON within 20 pulses after the trailing edge shift motor starts to rotate cw; however, • The HP sensor did not go ON within 20 pulses after the motor started to rotate cw. • The HP sensor did not switch from ON to OFF within 67 ms after the trailing edge shift motor started to rotate either cw or ccw.
    • Remedy: • Trailing edge shift motor harness loose, broken, defective • HP sensor harness loose, broken, defective • Motor overload due to blockage • Motor driver defective • Sensor defective


    This is for the Pro 8110 though...

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here