Results 1 to 10 of 10
  1. #1
    Service Manager 1,000+ Posts
    Join Date
    Jun 2012
    Location
    Turnhout
    Posts
    1,432
    Rep Power
    39

    mpc3002 L.E. registration ADF for rear side

    The serv manual says this about it:

    sp 6006 - 003 Leading Edge Registration
    Adjusts the amount of paper buckle to correct original skew for the front and rear sides.

    Yes, it is possible to adjust the L.E. registr. for the front, but not the rear, although the manual says (see above) "for the front an rear sides"...
    It is now 0.7 and L.E. front is ok, but rear i can not seem to adjust.

    Anyone has seen this before?
    Firmware is up to date.
    DF counter is 16K.
    Thanks you for helping.

  2. #2
    Field Supervisor 500+ Posts
    mpc3002 L.E. registration ADF for rear side

    GIUBOSS's Avatar
    Join Date
    Jul 2013
    Location
    Roma
    Posts
    615
    Rep Power
    42

    Re: mpc3002 L.E. registration ADF for rear side

    Quote Originally Posted by Mark Bbb View Post
    The serv manual says this about it:

    sp 6006 - 003 Leading Edge Registration
    Adjusts the amount of paper buckle to correct original skew for the front and rear sides.

    Yes, it is possible to adjust the L.E. registr. for the front, but not the rear, although the manual says (see above) "for the front an rear sides"...
    It is now 0.7 and L.E. front is ok, but rear i can not seem to adjust.

    Anyone has seen this before?
    Firmware is up to date.
    DF counter is 16K.
    Thanks you for helping.
    it's not because the adjustment itself shifts the entire image, check in the birth certificate, there should also be a margin adjustment in copy mode in the user tools.
    Last edited by GIUBOSS; 04-27-2021 at 03:47 PM.

  3. #3
    Retired 10,000+ Posts slimslob's Avatar
    Join Date
    May 2013
    Location
    Bakersfield, CA
    Posts
    14,903
    Rep Power
    409

    Re: mpc3002 L.E. registration ADF for rear side

    If I remember correctly, adf trail edge registration can be adjusted by changing SP 6017 DF Magnification Adjustment.

  4. #4
    Senior Tech 250+ Posts
    Join Date
    Sep 2009
    Posts
    261
    Rep Power
    32

    Re: mpc3002 L.E. registration ADF for rear side

    Quote Originally Posted by slimslob View Post
    If I remember correctly, adf trail edge registration can be adjusted by changing SP 6017 DF Magnification Adjustment.
    You are correct Slim. That takes care of the edge that they are seeing. I forget if it was -0.9 or +0.9 that did the trick. It's weird, but that does take care of second side issue.
    Sex with my wife is like driving a Ferarri at 190 m.p.h.
    Yeah, I don't get to do that either


    My luck they will bury me with a winning lottery ticket in my pants pocket

  5. #5
    Service Manager 1,000+ Posts
    Join Date
    Jun 2012
    Location
    Turnhout
    Posts
    1,432
    Rep Power
    39

    Re: mpc3002 L.E. registration ADF for rear side

    Thank you for your help, but the problem is not a visible line at the rear of the paper (that can be solved by increasing the value of magnification sp6017) but the entire image that moves towards the L.E. of the paper travel. There is a L.E. adjustment SP for the recto, but not a working one for the verso side.
    6006-11 makes no difference, whatever the value is. I tried with user tools, margin back verso, no good.
    Last edited by Mark Bbb; 04-28-2021 at 11:23 AM.

  6. #6
    Service Manager 1,000+ Posts
    Join Date
    Jun 2012
    Location
    Turnhout
    Posts
    1,432
    Rep Power
    39

    Re: mpc3002 L.E. registration ADF for rear side

    I want to upgrade the ADF firmware, but it failed via "my-ricoh".
    I haven't access yet for octopus, it would be nice if someone please provide us with the latest ADF firmware for c3003.
    D5785300B is the actual firmware in this machine.
    Is it far out of date?
    Thank you in advance.

  7. #7
    unTrusted Tech 250+ Posts imaginemoko's Avatar
    Join Date
    Jan 2008
    Posts
    274
    Rep Power
    30

    Re: mpc3002 L.E. registration ADF for rear side

    Quote Originally Posted by Mark Bbb View Post
    The serv manual says this about it:

    sp 6006 - 003 Leading Edge Registration
    Adjusts the amount of paper buckle to correct original skew for the front and rear sides.

    Yes, it is possible to adjust the L.E. registr. for the front, but not the rear, although the manual says (see above) "for the front an rear sides"...
    It is now 0.7 and L.E. front is ok, but rear i can not seem to adjust.

    Anyone has seen this before?
    Firmware is up to date.
    DF counter is 16K.
    Thanks you for helping.

    Not sure Sir but have you try to play values in Copier Features Edit tabs.
    fix the customer first then fix the machine... its simple and makes life more easy.

  8. #8
    Service Manager 1,000+ Posts
    Join Date
    Jun 2012
    Location
    Turnhout
    Posts
    1,432
    Rep Power
    39

    Re: mpc3002 L.E. registration ADF for rear side

    Quote Originally Posted by imaginemoko View Post
    Not sure Sir but have you try to play values in Copier Features Edit tabs.
    Yes, i did.
    Both in user or SP mode, no matter what value it does not affect the rear registration.

  9. #9
    Senior Tech 250+ Posts
    Join Date
    Sep 2009
    Posts
    261
    Rep Power
    32

    Re: mpc3002 L.E. registration ADF for rear side

    Quote Originally Posted by Mark Bbb View Post
    Thank you for your help, but the problem is not a visible line at the rear of the paper (that can be solved by increasing the value of magnification sp6017) but the entire image that moves towards the L.E. of the paper travel. There is a L.E. adjustment SP for the recto, but not a working one for the verso side.
    6006-11 makes no difference, whatever the value is. I tried with user tools, margin back verso, no good.

    Ok. Have you tried going back to basics. Using the trimming pattern to check paper travel front and back. Maybe your duplex paper travel is the culprit. Then check your leading edges off the platen, finally check through the feeder. I was also going to suggest the usertools, copier, edit to set defaults to zero for shifts.

    In the past, I've had some weird issues with voids and leading edges. For some reason, you turn off the voids, you could move the leading edge. Might be pulling at straws, but worth a try.
    Sex with my wife is like driving a Ferarri at 190 m.p.h.
    Yeah, I don't get to do that either


    My luck they will bury me with a winning lottery ticket in my pants pocket

  10. #10
    Retired 10,000+ Posts slimslob's Avatar
    Join Date
    May 2013
    Location
    Bakersfield, CA
    Posts
    14,903
    Rep Power
    409

    Re: mpc3002 L.E. registration ADF for rear side

    Quote Originally Posted by Mark Bbb View Post
    Thank you for your help, but the problem is not a visible line at the rear of the paper (that can be solved by increasing the value of magnification sp6017) but the entire image that moves towards the L.E. of the paper travel. There is a L.E. adjustment SP for the recto, but not a working one for the verso side.
    6006-11 makes no difference, whatever the value is. I tried with user tools, margin back verso, no good.
    I know that there is an adjustment for the trail edge on some models because I have done them. They were a pain because you had to increase/decrease by 10 in order to move the trail edge 1mm.

    What I found best was to first set all trays to the glass and run a few copies to make sure it didn't drift. Default buckle on many machines now is -1 which can cause drift. Next set ADF single side to single side registration. Now bearing in mind that the in duplex page 1 is printed second, adjust the duplex unit registration SP 1001-013/014/015 depending on paper weight. Finally fine tune ADF duplex front and rear buckle SP 6006-005 Buckle: Duplex Front and SP 6006-006 Buckle: Duplex Rear. I hope this helps.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here