optics cleaning cloth + platen glass slippery product

[40yearsplus]

Static Control Components sells a stable cotton cloth you can use that I have not seen leave any fibers. I think Uninet makes it for them or you can get from Uninet.

Most anything that doesn't leave fibers behind.

For Glass Lube:

In the 80s there was a Canon NP270, NP400, etc..... Back then the document feeder was a full belt that ran the paper across the glass and out the other side. No Cut glass then.

This sounds unnatural but WD40 is can be used for cleaning and I would put a surface of this on the glass and buff it clean. You can put it on your rag and buff it in, then polish til clean. Try it sometime it fills the pores of the glass and gets rid of resistance. Don't need much. Not for the interior optics, use that dry cloth for any of that wiping down.

Nowadays I hardly have to worry about making slippery Glass.

[Mark Bbb]

Use olive oil and red-wine vinegar...add salt and pepper for a light lunch condiment!

I'll do that,Richard.

[Mark Bbb]

I’ve always been a big fan of Rain-X.

It really keeps the junk from sticking to the glass.

Ken, will this product also set a wax on the platen glass?