Page 2 of 2 FirstFirst 12
Results 11 to 17 of 17
  1. #11
    Field Supervisor 500+ Posts digicor's Avatar
    Join Date
    Jul 2008
    Location
    tampa Florida
    Posts
    960
    Rep Power
    37

    Re: mpc6004ex only one impression

    fusing sleeve part i have is D2424042 is there another part # ?
    i cant seem to find this in my suppliers

  2. #12
    Field Supervisor 500+ Posts digicor's Avatar
    Join Date
    Jul 2008
    Location
    tampa Florida
    Posts
    960
    Rep Power
    37

    Re: mpc6004ex only one impression

    found it as D2424041 not 42

  3. #13
    Retired 10,000+ Posts slimslob's Avatar
    Join Date
    May 2013
    Location
    Bakersfield, CA
    Posts
    15,044
    Rep Power
    414

    Re: mpc6004ex only one impression

    Quote Originally Posted by digicor View Post
    fusing sleeve part i have is D2424042 is there another part # ?
    i cant seem to find this in my suppliers
    Quote Originally Posted by digicor View Post
    found it as D2424041 not 42
    D2424041 is what is shown in the Product Support Guide for North America. Based on the Parts Catalog I have for the slower models the 42 might be the 220/240 volt model for most of the rest of the world.

  4. #14
    Copier Technician 1,000+ Posts
    mpc6004ex only one impression

    mga's Avatar
    Join Date
    Dec 2010
    Location
    london
    Posts
    1,254
    Rep Power
    121

    Re: mpc6004ex only one impression

    Quote Originally Posted by digicor View Post
    early part failure at like 70k? for a fuser sleeve thats supposed to go at least 150? probably the issue....
    The sleeve assy is 400k if oem complete assy not just fit sleeve film on it own Ie compatible that could cause double image as well as rubbish toner

  5. #15
    Field Supervisor 500+ Posts digicor's Avatar
    Join Date
    Jul 2008
    Location
    tampa Florida
    Posts
    960
    Rep Power
    37

    Re: mpc6004ex only one impression

    its oem as far as i can tell, i ordered oem sleeve and lower roller always replace these together,
    toner is oem, i just can see failure at 60k-70k impressions,,, but who knows..

  6. #16
    Service Manager 10,000+ Posts
    mpc6004ex only one impression

    Phil B.'s Avatar
    Join Date
    Jul 2016
    Location
    Raleigh NC
    Posts
    14,238
    Rep Power
    376

    Re: mpc6004ex only one impression

    Quote Originally Posted by digicor View Post
    its oem as far as i can tell, i ordered oem sleeve and lower roller always replace these together,
    toner is oem, i just can see failure at 60k-70k impressions,,, but who knows..
    never skimp on fuser rebuilds... bearing seize.. thermostats and thermistors go bad... I ALWAYS do a complete rebuild.

  7. #17
    Field Supervisor 500+ Posts digicor's Avatar
    Join Date
    Jul 2008
    Location
    tampa Florida
    Posts
    960
    Rep Power
    37

    Re: mpc6004ex only one impression

    update on double imaging
    the toner was some crap aftermarket toner, dont know who put that in or how it got in the machine, i suspect someone swapped out a oem for a compatable...
    i switched out ran about 300 copies, first few had slight shadow but then it went away, the fuser is popping a bit after the copies have been generated is there a setting for this? rotation after the job?
    , i suspect someone took the NEW fuser with 40k on it and put a used fuser in it at the warehouse where i bought the machine
    this is common among thieves and copier guys...
    thanks for the help

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here